diff options
Diffstat (limited to 'arch/sandbox/include/asm/test.h')
| -rw-r--r-- | arch/sandbox/include/asm/test.h | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/arch/sandbox/include/asm/test.h b/arch/sandbox/include/asm/test.h new file mode 100644 index 0000000..cd2b9e3 --- /dev/null +++ b/arch/sandbox/include/asm/test.h @@ -0,0 +1,216 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Test-related constants for sandbox + * + * Copyright (c) 2014 Google, Inc + */ + +#ifndef __ASM_TEST_H +#define __ASM_TEST_H + +/* The sandbox driver always permits an I2C device with this address */ +#define SANDBOX_I2C_TEST_ADDR 0x59 + +#define SANDBOX_PCI_VENDOR_ID 0x1234 +#define SANDBOX_PCI_SWAP_CASE_EMUL_ID 0x5678 +#define SANDBOX_PCI_CLASS_CODE PCI_CLASS_CODE_COMM +#define SANDBOX_PCI_CLASS_SUB_CODE PCI_CLASS_SUB_CODE_COMM_SERIAL + +#define PCI_CAP_ID_PM_OFFSET 0x50 +#define PCI_CAP_ID_EXP_OFFSET 0x60 +#define PCI_CAP_ID_MSIX_OFFSET 0x70 +#define PCI_CAP_ID_EA_OFFSET 0x80 + +#define PCI_EXT_CAP_ID_ERR_OFFSET 0x100 +#define PCI_EXT_CAP_ID_VC_OFFSET 0x200 +#define PCI_EXT_CAP_ID_DSN_OFFSET 0x300 + +/* Useful for PCI_VDEVICE() macro */ +#define PCI_VENDOR_ID_SANDBOX SANDBOX_PCI_VENDOR_ID +#define SWAP_CASE_DRV_DATA 0x55aa + +#define SANDBOX_CLK_RATE 32768 + +/* Macros used to test PCI EA capability structure */ +#define PCI_CAP_EA_BASE_LO0 0x00100000 +#define PCI_CAP_EA_BASE_LO1 0x00110000 +#define PCI_CAP_EA_BASE_LO2 0x00120000 +#define PCI_CAP_EA_BASE_LO4 0x00140000 +#define PCI_CAP_EA_BASE_HI2 0x00020000ULL +#define PCI_CAP_EA_BASE_HI4 0x00040000ULL +#define PCI_CAP_EA_SIZE_LO 0x0000ffff +#define PCI_CAP_EA_SIZE_HI 0x00000010ULL +#define PCI_EA_BAR2_MAGIC 0x72727272 +#define PCI_EA_BAR4_MAGIC 0x74747474 + +/* System controller driver data */ +enum { + SYSCON0 = 32, + SYSCON1, + + SYSCON_COUNT +}; + +/** + * sandbox_i2c_set_test_mode() - set test mode for running unit tests + * + * See sandbox_i2c_xfer() for the behaviour changes. + * + * @bus: sandbox I2C bus to adjust + * @test_mode: true to select test mode, false to run normally + */ +void sandbox_i2c_set_test_mode(struct udevice *bus, bool test_mode); + +enum sandbox_i2c_eeprom_test_mode { + SIE_TEST_MODE_NONE, + /* Permits read/write of only one byte per I2C transaction */ + SIE_TEST_MODE_SINGLE_BYTE, +}; + +void sandbox_i2c_eeprom_set_test_mode(struct udevice *dev, + enum sandbox_i2c_eeprom_test_mode mode); + +void sandbox_i2c_eeprom_set_offset_len(struct udevice *dev, int offset_len); + +/** + * sandbox_i2c_rtc_set_offset() - set the time offset from system/base time + * + * @dev: RTC device to adjust + * @use_system_time: true to use system time, false to use @base_time + * @offset: RTC offset from current system/base time (-1 for no + * change) + * @return old value of RTC offset + */ +long sandbox_i2c_rtc_set_offset(struct udevice *dev, bool use_system_time, + int offset); + +/** + * sandbox_i2c_rtc_get_set_base_time() - get and set the base time + * + * @dev: RTC device to adjust + * @base_time: New base system time (set to -1 for no change) + * @return old base time + */ +long sandbox_i2c_rtc_get_set_base_time(struct udevice *dev, long base_time); + +int sandbox_usb_keyb_add_string(struct udevice *dev, const char *str); + +/** + * sandbox_osd_get_mem() - get the internal memory of a sandbox OSD + * + * @dev: OSD device for which to access the internal memory for + * @buf: pointer to buffer to receive the OSD memory data + * @buflen: length of buffer in bytes + */ +int sandbox_osd_get_mem(struct udevice *dev, u8 *buf, size_t buflen); + +/** + * sandbox_pwm_get_config() - get the PWM config for a channel + * + * @dev: Device to check + * @channel: Channel number to check + * @period_ns: Period of the PWM in nanoseconds + * @duty_ns: Current duty cycle of the PWM in nanoseconds + * @enable: true if the PWM is enabled + * @polarity: true if the PWM polarity is active high + * @return 0 if OK, -ENOSPC if the PWM number is invalid + */ +int sandbox_pwm_get_config(struct udevice *dev, uint channel, uint *period_nsp, + uint *duty_nsp, bool *enablep, bool *polarityp); + +/** + * sandbox_sf_set_block_protect() - Set the BP bits of the status register + * + * @dev: Device to update + * @bp_mask: BP bits to set (bits 2:0, so a value of 0 to 7) + */ +void sandbox_sf_set_block_protect(struct udevice *dev, int bp_mask); + +/** + * sandbox_get_codec_params() - Read back codec parameters + * + * This reads back the parameters set by audio_codec_set_params() for the + * sandbox audio driver. Arguments are as for that function. + */ +void sandbox_get_codec_params(struct udevice *dev, int *interfacep, int *ratep, + int *mclk_freqp, int *bits_per_samplep, + uint *channelsp); + +/** + * sandbox_get_i2s_sum() - Read back the sum of the audio data so far + * + * This data is provided to the sandbox driver by the I2S tx_data() method. + * + * @dev: Device to check + * @return sum of audio data + */ +int sandbox_get_i2s_sum(struct udevice *dev); + +/** + * sandbox_get_setup_called() - Returns the number of times setup(*) was called + * + * This is used in the sound test + * + * @dev: Device to check + * @return call count for the setup() method + */ +int sandbox_get_setup_called(struct udevice *dev); + +/** + * sandbox_get_sound_sum() - Read back the sum of the sound data so far + * + * This data is provided to the sandbox driver by the sound play() method. + * + * @dev: Device to check + * @return sum of audio data + */ +int sandbox_get_sound_sum(struct udevice *dev); + +/** + * sandbox_set_allow_beep() - Set whether the 'beep' interface is supported + * + * @dev: Device to update + * @allow: true to allow the start_beep() method, false to disallow it + */ +void sandbox_set_allow_beep(struct udevice *dev, bool allow); + +/** + * sandbox_get_beep_frequency() - Get the frequency of the current beep + * + * @dev: Device to check + * @return frequency of beep, if there is an active beep, else 0 + */ +int sandbox_get_beep_frequency(struct udevice *dev); + +/** + * sandbox_get_pch_spi_protect() - Get the PCI SPI protection status + * + * @dev: Device to check + * @return 0 if not protected, 1 if protected + */ +int sandbox_get_pch_spi_protect(struct udevice *dev); + +/** + * sandbox_get_pci_ep_irq_count() - Get the PCI EP IRQ count + * + * @dev: Device to check + * @return irq count + */ +int sandbox_get_pci_ep_irq_count(struct udevice *dev); + +/** + * sandbox_pci_read_bar() - Read the BAR value for a read_config operation + * + * This is used in PCI emulators to read a base address reset. This has special + * rules because when the register is set to 0xffffffff it can be used to + * discover the type and size of the BAR. + * + * @barval: Current value of the BAR + * @type: Type of BAR (PCI_BASE_ADDRESS_SPACE_IO or + * PCI_BASE_ADDRESS_MEM_TYPE_32) + * @size: Size of BAR in bytes + * @return BAR value to return from emulator + */ +uint sandbox_pci_read_bar(u32 barval, int type, uint size); + +#endif |