diff options
Diffstat (limited to 'arch/x86/include/asm/arch-quark/mrc.h')
| -rw-r--r-- | arch/x86/include/asm/arch-quark/mrc.h | 186 |
1 files changed, 186 insertions, 0 deletions
diff --git a/arch/x86/include/asm/arch-quark/mrc.h b/arch/x86/include/asm/arch-quark/mrc.h new file mode 100644 index 0000000..2353426 --- /dev/null +++ b/arch/x86/include/asm/arch-quark/mrc.h @@ -0,0 +1,186 @@ +/* SPDX-License-Identifier: Intel */ +/* + * Copyright (C) 2013, Intel Corporation + * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> + * + * Ported from Intel released Quark UEFI BIOS + * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei + */ + +#ifndef _MRC_H_ +#define _MRC_H_ + +#define MRC_VERSION 0x0111 + +/* architectural definitions */ +#define NUM_CHANNELS 1 /* number of channels */ +#define NUM_RANKS 2 /* number of ranks per channel */ +#define NUM_BYTE_LANES 4 /* number of byte lanes per channel */ + +/* software limitations */ +#define MAX_CHANNELS 1 +#define MAX_RANKS 2 +#define MAX_BYTE_LANES 4 + +#define MAX_SOCKETS 1 +#define MAX_SIDES 1 +#define MAX_ROWS (MAX_SIDES * MAX_SOCKETS) + +/* Specify DRAM and channel width */ +enum { + X8, /* DRAM width */ + X16, /* DRAM width & Channel Width */ + X32 /* Channel Width */ +}; + +/* Specify DRAM speed */ +enum { + DDRFREQ_800, + DDRFREQ_1066 +}; + +/* Specify DRAM type */ +enum { + DDR3, + DDR3L +}; + +/* + * density: 0=512Mb, 1=Gb, 2=2Gb, 3=4Gb + * cl: DRAM CAS Latency in clocks + * ras: ACT to PRE command period + * wtr: Delay from start of internal write transaction to internal read command + * rrd: ACT to ACT command period (JESD79 specific to page size 1K/2K) + * faw: Four activate window (JESD79 specific to page size 1K/2K) + * + * ras/wtr/rrd/faw timings are in picoseconds + * + * Refer to JEDEC spec (or DRAM datasheet) when changing these values. + */ +struct dram_params { + uint8_t density; + uint8_t cl; + uint32_t ras; + uint32_t wtr; + uint32_t rrd; + uint32_t faw; +}; + +/* + * Delay configuration for individual signals + * Vref setting + * Scrambler seed + */ +struct mrc_timings { + uint32_t rcvn[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES]; + uint32_t rdqs[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES]; + uint32_t wdqs[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES]; + uint32_t wdq[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES]; + uint32_t vref[NUM_CHANNELS][NUM_BYTE_LANES]; + uint32_t wctl[NUM_CHANNELS][NUM_RANKS]; + uint32_t wcmd[NUM_CHANNELS]; + uint32_t scrambler_seed; + /* need to save for the case of frequency change */ + uint8_t ddr_speed; +}; + +/* Boot mode defined as bit mask (1<<n) */ +enum { + BM_UNKNOWN, + BM_COLD = 1, /* full training */ + BM_FAST = 2, /* restore timing parameters */ + BM_S3 = 4, /* resume from S3 */ + BM_WARM = 8 +}; + +/* MRC execution status */ +#define MRC_SUCCESS 0 /* initialization ok */ +#define MRC_E_MEMTEST 1 /* memtest failed */ + +/* + * Memory Reference Code parameters + * + * It includes 3 parts: + * - input parameters like boot mode and DRAM parameters + * - context parameters for MRC internal state + * - output parameters like initialization result and memory size + */ +struct mrc_params { + /* Input parameters */ + uint32_t boot_mode; /* BM_COLD, BM_FAST, BM_WARM, BM_S3 */ + /* DRAM parameters */ + uint8_t dram_width; /* x8, x16 */ + uint8_t ddr_speed; /* DDRFREQ_800, DDRFREQ_1066 */ + uint8_t ddr_type; /* DDR3, DDR3L */ + uint8_t ecc_enables; /* 0, 1 (memory size reduced to 7/8) */ + uint8_t scrambling_enables; /* 0, 1 */ + /* 1, 3 (1'st rank has to be populated if 2'nd rank present) */ + uint32_t rank_enables; + uint32_t channel_enables; /* 1 only */ + uint32_t channel_width; /* x16 only */ + /* 0, 1, 2 (mode 2 forced if ecc enabled) */ + uint32_t address_mode; + /* REFRESH_RATE: 1=1.95us, 2=3.9us, 3=7.8us, others=RESERVED */ + uint8_t refresh_rate; + /* SR_TEMP_RANGE: 0=normal, 1=extended, others=RESERVED */ + uint8_t sr_temp_range; + /* + * RON_VALUE: 0=34ohm, 1=40ohm, others=RESERVED + * (select MRS1.DIC driver impedance control) + */ + uint8_t ron_value; + /* RTT_NOM_VALUE: 0=40ohm, 1=60ohm, 2=120ohm, others=RESERVED */ + uint8_t rtt_nom_value; + /* RD_ODT_VALUE: 0=off, 1=60ohm, 2=120ohm, 3=180ohm, others=RESERVED */ + uint8_t rd_odt_value; + struct dram_params params; + /* Internally used context parameters */ + uint32_t board_id; /* board layout (use x8 or x16 memory) */ + uint32_t hte_setup; /* when set hte reconfiguration requested */ + uint32_t menu_after_mrc; + uint32_t power_down_disable; + uint32_t tune_rcvn; + uint32_t channel_size[NUM_CHANNELS]; + uint32_t column_bits[NUM_CHANNELS]; + uint32_t row_bits[NUM_CHANNELS]; + uint32_t mrs1; /* register content saved during training */ + uint8_t first_run; + /* Output parameters */ + /* initialization result (non zero specifies error code) */ + uint32_t status; + /* total memory size in bytes (excludes ECC banks) */ + uint32_t mem_size; + /* training results (also used on input) */ + struct mrc_timings timings; +}; + +/* + * MRC memory initialization structure + * + * post_code: a 16-bit post code of a specific initialization routine + * boot_path: bitwise or of BM_COLD, BM_FAST, BM_WARM and BM_S3 + * init_fn: real memory initialization routine + */ +struct mem_init { + uint16_t post_code; + uint16_t boot_path; + void (*init_fn)(struct mrc_params *mrc_params); +}; + +/* MRC platform data flags */ +#define MRC_FLAG_ECC_EN 0x00000001 +#define MRC_FLAG_SCRAMBLE_EN 0x00000002 +#define MRC_FLAG_MEMTEST_EN 0x00000004 +/* 0b DDR "fly-by" topology else 1b DDR "tree" topology */ +#define MRC_FLAG_TOP_TREE_EN 0x00000008 +/* If set ODR signal is asserted to DRAM devices on writes */ +#define MRC_FLAG_WR_ODT_EN 0x00000010 + +/** + * mrc_init - Memory Reference Code initialization entry routine + * + * @mrc_params: parameters for MRC + */ +void mrc_init(struct mrc_params *mrc_params); + +#endif /* _MRC_H_ */ |