1 files changed, 131 insertions, 0 deletions
diff --git a/arch/x86/include/asm/cpu_common.h b/arch/x86/include/asm/cpu_common.h
new file mode 100644
index 0000000..cdd99a9
--- /dev/null
+++ b/arch/x86/include/asm/cpu_common.h
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Common code for Intel CPUs
+ *
+ * Copyright (c) 2016 Google, Inc
+ */
+
+#ifndef __ASM_CPU_COMMON_H
+#define __ASM_CPU_COMMON_H
+
+/* Standard Intel bus clock is fixed at 100MHz */
+enum {
+	INTEL_BCLK_MHZ		= 100
+};
+
+struct cpu_info;
+
+/**
+ * cpu_common_init() - Set up common CPU init
+ *
+ * This reports BIST failure, enables the LAPIC, updates microcode, enables
+ * the upper 128-bytes of CROM RAM, probes the northbridge, PCH, LPC and SATA.
+ *
+ * @return 0 if OK, -ve on error
+ */
+int cpu_common_init(void);
+
+/**
+ * cpu_set_flex_ratio_to_tdp_nominal() - Set up the maximum non-turbo rate
+ *
+ * If a change is needed, this function will do a soft reset so it takes
+ * effect.
+ *
+ * Some details are available here:
+ * http://forum.hwbot.org/showthread.php?t=76092
+ *
+ * @return 0 if OK, -ve on error
+ */
+int cpu_set_flex_ratio_to_tdp_nominal(void);
+
+/**
+ * cpu_intel_get_info() - Obtain CPU info for Intel CPUs
+ *
+ * Most Intel CPUs use the same MSR to obtain the clock speed, and use the same
+ * features. This function fills in these values, given the value of the base
+ * clock in MHz (typically this should be set to 100).
+ *
+ * @info:	cpu_info struct to fill in
+ * @bclk_mz:	the base clock in MHz
+ *
+ * @return 0 always
+ */
+int cpu_intel_get_info(struct cpu_info *info, int bclk_mz);
+
+/**
+ * cpu_configure_thermal_target() - Set the thermal target for a CPU
+ *
+ * This looks up the tcc-offset property and uses it to set the
+ * MSR_TEMPERATURE_TARGET value.
+ *
+ * @dev: CPU device
+ * @return 0 if OK, -ENOENT if no target is given in device tree
+ */
+int cpu_configure_thermal_target(struct udevice *dev);
+
+/**
+ * cpu_set_perf_control() - Set the nominal CPU clock speed
+ *
+ * This sets the clock speed as a multiplier of BCLK
+ *
+ * @clk_ratio: Ratio to use
+ */
+void cpu_set_perf_control(uint clk_ratio);
+
+/**
+ * cpu_config_tdp_levels() - Check for configurable TDP option
+ *
+ * @return true if the CPU has configurable TDP (Thermal-design power)
+ */
+bool cpu_config_tdp_levels(void);
+
+/** enum burst_mode_t - Burst-mode states */
+enum burst_mode_t {
+	BURST_MODE_UNKNOWN,
+	BURST_MODE_UNAVAILABLE,
+	BURST_MODE_DISABLED,
+	BURST_MODE_ENABLED
+};
+
+/*
+ * cpu_get_burst_mode_state() - Get the Burst/Turbo Mode State
+ *
+ * This reads MSR IA32_MISC_ENABLE 0x1A0
+ * Bit 38 - TURBO_MODE_DISABLE Bit to get state ENABLED / DISABLED.
+ * Also checks cpuid 0x6 to see whether burst mode is supported.
+ *
+ * @return current burst mode status
+ */
+enum burst_mode_t cpu_get_burst_mode_state(void);
+
+/**
+ * cpu_set_burst_mode() - Set CPU burst mode
+ *
+ * @burst_mode: true to enable burst mode, false to disable
+ */
+void cpu_set_burst_mode(bool burst_mode);
+
+/**
+ * cpu_set_eist() - Enable Enhanced Intel Speed Step Technology
+ *
+ * @eist_status: true to enable EIST, false to disable
+ */
+void cpu_set_eist(bool eist_status);
+
+/**
+ * cpu_set_p_state_to_turbo_ratio() - Set turbo ratio
+ *
+ * TURBO_RATIO_LIMIT MSR (0x1AD) Bits 31:0 indicates the
+ * factory configured values for of 1-core, 2-core, 3-core
+ * and 4-core turbo ratio limits for all processors.
+ *
+ * 7:0 -	MAX_TURBO_1_CORE
+ * 15:8 -	MAX_TURBO_2_CORES
+ * 23:16 -	MAX_TURBO_3_CORES
+ * 31:24 -	MAX_TURBO_4_CORES
+ *
+ * Set PERF_CTL MSR (0x199) P_Req with that value.
+ */
+void cpu_set_p_state_to_turbo_ratio(void);
+
+#endif