1 files changed, 56 insertions, 0 deletions
diff --git a/arch/x86/include/asm/i8254.h b/arch/x86/include/asm/i8254.h
new file mode 100644
index 0000000..d769daf
--- /dev/null
+++ b/arch/x86/include/asm/i8254.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ */
+
+/* i8254.h Intel 8254 PIT registers */
+
+#ifndef _ASMI386_I8254_H_
+#define _ASMI386_I8954_H_
+
+#define PIT_T0		0x00	/* PIT channel 0 count/status */
+#define PIT_T1		0x01	/* PIT channel 1 count/status */
+#define PIT_T2		0x02	/* PIT channel 2 count/status */
+#define PIT_COMMAND	0x03	/* PIT mode control, latch and read back */
+
+/* PIT Command Register Bit Definitions */
+
+#define PIT_CMD_CTR0	0x00	/* Select PIT counter 0 */
+#define PIT_CMD_CTR1	0x40	/* Select PIT counter 1 */
+#define PIT_CMD_CTR2	0x80	/* Select PIT counter 2 */
+
+#define PIT_CMD_LATCH	0x00	/* Counter Latch Command */
+#define PIT_CMD_LOW	0x10	/* Access counter bits 7-0 */
+#define PIT_CMD_HIGH	0x20	/* Access counter bits 15-8 */
+#define PIT_CMD_BOTH	0x30	/* Access counter bits 15-0 in two accesses */
+
+#define PIT_CMD_MODE0	0x00	/* Select mode 0 */
+#define PIT_CMD_MODE1	0x02	/* Select mode 1 */
+#define PIT_CMD_MODE2	0x04	/* Select mode 2 */
+#define PIT_CMD_MODE3	0x06	/* Select mode 3 */
+#define PIT_CMD_MODE4	0x08	/* Select mode 4 */
+#define PIT_CMD_MODE5	0x0a	/* Select mode 5 */
+
+/* The clock frequency of the i8253/i8254 PIT */
+#define PIT_TICK_RATE	1193182
+
+/**
+ * i8254_enable_beep() - Start a beep using the PCAT timer
+ *
+ * This starts beeping using the legacy i8254 timer. The beep may be silenced
+ * after a delay with i8254_disable_beep().
+ *
+ * @frequency_hz: Frequency of beep in Hz
+ * @return 0 if OK, -EINVAL if frequency_hz is 0
+ */
+int i8254_enable_beep(uint frequency_hz);
+
+/**
+ * i8254_disable_beep() - Disable the bepper
+ *
+ * This stops any existing beep
+ */
+void i8254_disable_beep(void);
+
+#endif /* _ASMI386_I8954_H_ */