diff options
Diffstat (limited to 'arch/x86/include/asm/speedstep.h')
| -rw-r--r-- | arch/x86/include/asm/speedstep.h | 88 |
1 files changed, 88 insertions, 0 deletions
diff --git a/arch/x86/include/asm/speedstep.h b/arch/x86/include/asm/speedstep.h new file mode 100644 index 0000000..43bfabf --- /dev/null +++ b/arch/x86/include/asm/speedstep.h @@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * From Coreboot file of same name + * + * Copyright (C) 2007-2009 coresystems GmbH + * 2012 secunet Security Networks AG + */ + +#ifndef _ASM_SPEEDSTEP_H +#define _ASM_SPEEDSTEP_H + +/* Magic value used to locate speedstep configuration in the device tree */ +#define SPEEDSTEP_APIC_MAGIC 0xACAC + +/* MWAIT coordination I/O base address. This must match + * the \_PR_.CPU0 PM base address. + */ +#define PMB0_BASE 0x510 + +/* PMB1: I/O port that triggers SMI once cores are in the same state. + * See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4] + */ +#define PMB1_BASE 0x800 + +struct sst_state { + uint8_t dynfsb:1; /* whether this is SLFM */ + uint8_t nonint:1; /* add .5 to ratio */ + uint8_t ratio:6; + uint8_t vid; + uint8_t is_turbo; + uint8_t is_slfm; + uint32_t power; +}; +#define SPEEDSTEP_RATIO_SHIFT 8 +#define SPEEDSTEP_RATIO_DYNFSB_SHIFT (7 + SPEEDSTEP_RATIO_SHIFT) +#define SPEEDSTEP_RATIO_DYNFSB (1 << SPEEDSTEP_RATIO_DYNFSB_SHIFT) +#define SPEEDSTEP_RATIO_NONINT_SHIFT (6 + SPEEDSTEP_RATIO_SHIFT) +#define SPEEDSTEP_RATIO_NONINT (1 << SPEEDSTEP_RATIO_NONINT_SHIFT) +#define SPEEDSTEP_RATIO_VALUE_MASK (0x1f << SPEEDSTEP_RATIO_SHIFT) +#define SPEEDSTEP_VID_MASK 0x3f +#define SPEEDSTEP_STATE_FROM_MSR(val, mask) ((struct sst_state){ \ + 0, /* dynfsb won't be read. */ \ + ((val & mask) & SPEEDSTEP_RATIO_NONINT) ? 1 : 0, \ + (((val & mask) & SPEEDSTEP_RATIO_VALUE_MASK) \ + >> SPEEDSTEP_RATIO_SHIFT), \ + (val & mask) & SPEEDSTEP_VID_MASK, \ + 0, /* not turbo by default */ \ + 0, /* not slfm by default */ \ + 0 /* power is hardcoded in software. */ \ + }) +#define SPEEDSTEP_ENCODE_STATE(state) ( \ + ((uint16_t)(state).dynfsb << SPEEDSTEP_RATIO_DYNFSB_SHIFT) | \ + ((uint16_t)(state).nonint << SPEEDSTEP_RATIO_NONINT_SHIFT) | \ + ((uint16_t)(state).ratio << SPEEDSTEP_RATIO_SHIFT) | \ + ((uint16_t)(state).vid & SPEEDSTEP_VID_MASK)) +#define SPEEDSTEP_DOUBLE_RATIO(state) ( \ + ((uint8_t)(state).ratio * 2) + (state).nonint) + +struct sst_params { + struct sst_state slfm; + struct sst_state min; + struct sst_state max; + struct sst_state turbo; +}; + +/* Looking at core2's spec, the highest normal bus ratio for an eist enabled + processor is 14, the lowest is always 6. This makes 5 states with the + minimal step width of 2. With turbo mode and super LFM we have at most 7. */ +#define SPEEDSTEP_MAX_NORMAL_STATES 5 +#define SPEEDSTEP_MAX_STATES (SPEEDSTEP_MAX_NORMAL_STATES + 2) +struct sst_table { + /* Table of p-states for EMTTM and ACPI by decreasing performance. */ + struct sst_state states[SPEEDSTEP_MAX_STATES]; + int num_states; +}; + +void speedstep_gen_pstates(struct sst_table *); + +#define SPEEDSTEP_MAX_POWER_YONAH 31000 +#define SPEEDSTEP_MIN_POWER_YONAH 13100 +#define SPEEDSTEP_MAX_POWER_MEROM 35000 +#define SPEEDSTEP_MIN_POWER_MEROM 25000 +#define SPEEDSTEP_SLFM_POWER_MEROM 12000 +#define SPEEDSTEP_MAX_POWER_PENRYN 35000 +#define SPEEDSTEP_MIN_POWER_PENRYN 15000 +#define SPEEDSTEP_SLFM_POWER_PENRYN 12000 + +#endif |