1 files changed, 111 insertions, 0 deletions
diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h
new file mode 100644
index 0000000..2466ad2
--- /dev/null
+++ b/arch/x86/include/asm/u-boot-x86.h
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ */
+
+#ifndef _U_BOOT_I386_H_
+#define _U_BOOT_I386_H_	1
+
+struct global_data;
+
+extern char gdt_rom[];
+
+/* cpu/.../cpu.c */
+int arch_cpu_init(void);
+
+/**
+ * x86_cpu_init_f() - Set up basic features of the x86 CPU
+ *
+ * 0 on success, -ve on error
+ */
+int x86_cpu_init_f(void);
+
+/**
+ * x86_cpu_reinit_f() - Set up the CPU a second time
+ *
+ * Once cpu_init_f() has been called (e.g. in SPL) we should not call it
+ * again (e.g. in U-Boot proper) since it sets up the state from scratch.
+ * Call this function in later phases of U-Boot instead. It reads the CPU
+ * identify so that CPU functions can be used correctly, but does not change
+ * anything.
+ *
+ * @return 0 (indicating success, to mimic cpu_init_f())
+ */
+int x86_cpu_reinit_f(void);
+
+int cpu_init_f(void);
+void setup_gdt(struct global_data *id, u64 *gdt_addr);
+/*
+ * Setup FSP execution environment GDT to use the one we used in
+ * arch/x86/cpu/start16.S and reload the segment registers.
+ */
+void setup_fsp_gdt(void);
+int init_cache(void);
+int cleanup_before_linux(void);
+
+/* cpu/.../timer.c */
+void timer_isr(void *);
+typedef void (timer_fnc_t) (void);
+int register_timer_isr (timer_fnc_t *isr_func);
+unsigned long get_tbclk_mhz(void);
+void timer_set_base(uint64_t base);
+int i8254_init(void);
+
+/* cpu/.../interrupts.c */
+int cpu_init_interrupts(void);
+
+int cleanup_before_linux(void);
+int x86_cleanup_before_linux(void);
+void x86_enable_caches(void);
+void x86_disable_caches(void);
+int x86_init_cache(void);
+ulong board_get_usable_ram_top(ulong total_size);
+int default_print_cpuinfo(void);
+
+/* Set up a UART which can be used with printch(), printhex8(), etc. */
+int setup_internal_uart(int enable);
+
+void setup_pcat_compatibility(void);
+
+void isa_unmap_rom(u32 addr);
+u32 isa_map_rom(u32 bus_addr, int size);
+
+/* arch/x86/lib/... */
+int video_bios_init(void);
+
+/* arch/x86/lib/fsp1,2/... */
+
+/**
+ * fsp_save_s3_stack() - save stack address to CMOS for next S3 boot
+ *
+ * At the end of pre-relocation phase, save the new stack address
+ * to CMOS and use it as the stack on next S3 boot for fsp_init()
+ * continuation function.
+ *
+ * @return:	0 if OK, -ve on error
+ */
+int fsp_save_s3_stack(void);
+
+void	board_init_f_r_trampoline(ulong) __attribute__ ((noreturn));
+void	board_init_f_r(void) __attribute__ ((noreturn));
+
+int arch_misc_init(void);
+
+/* Read the time stamp counter */
+static inline __attribute__((no_instrument_function)) uint64_t rdtsc(void)
+{
+	uint32_t high, low;
+	__asm__ __volatile__("rdtsc" : "=a" (low), "=d" (high));
+	return (((uint64_t)high) << 32) | low;
+}
+
+/* board/... */
+void timer_set_tsc_base(uint64_t new_base);
+uint64_t timer_get_tsc(void);
+
+void quick_ram_check(void);
+
+#define PCI_VGA_RAM_IMAGE_START		0xc0000
+
+#endif	/* _U_BOOT_I386_H_ */