diff options
Diffstat (limited to 'include/command.h')
-rw-r--r-- | include/command.h | 362 |
1 files changed, 362 insertions, 0 deletions
diff --git a/include/command.h b/include/command.h new file mode 100644 index 0000000..f6170e7 --- /dev/null +++ b/include/command.h @@ -0,0 +1,362 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2000-2009 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + */ + +/* + * Definitions for Command Processor + */ +#ifndef __COMMAND_H +#define __COMMAND_H + +#include <env.h> +#include <linker_lists.h> + +#ifndef NULL +#define NULL 0 +#endif + +/* Default to a width of 8 characters for help message command width */ +#ifndef CONFIG_SYS_HELP_CMD_WIDTH +#define CONFIG_SYS_HELP_CMD_WIDTH 10 +#endif + +#ifndef __ASSEMBLY__ +/* + * Monitor Command Table + */ + +struct cmd_tbl_s { + char *name; /* Command Name */ + int maxargs; /* maximum number of arguments */ + /* + * Same as ->cmd() except the command + * tells us if it can be repeated. + * Replaces the old ->repeatable field + * which was not able to make + * repeatable property different for + * the main command and sub-commands. + */ + int (*cmd_rep)(struct cmd_tbl_s *cmd, int flags, int argc, + char * const argv[], int *repeatable); + /* Implementation function */ + int (*cmd)(struct cmd_tbl_s *, int, int, char * const []); + char *usage; /* Usage message (short) */ +#ifdef CONFIG_SYS_LONGHELP + char *help; /* Help message (long) */ +#endif +#ifdef CONFIG_AUTO_COMPLETE + /* do auto completion on the arguments */ + int (*complete)(int argc, char * const argv[], char last_char, int maxv, char *cmdv[]); +#endif +}; + +typedef struct cmd_tbl_s cmd_tbl_t; + + +#if defined(CONFIG_CMD_RUN) +extern int do_run(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +#endif + +/* common/command.c */ +int _do_help (cmd_tbl_t *cmd_start, int cmd_items, cmd_tbl_t * cmdtp, int + flag, int argc, char * const argv[]); +cmd_tbl_t *find_cmd(const char *cmd); +cmd_tbl_t *find_cmd_tbl (const char *cmd, cmd_tbl_t *table, int table_len); +int complete_subcmdv(cmd_tbl_t *cmdtp, int count, int argc, + char * const argv[], char last_char, int maxv, + char *cmdv[]); + +extern int cmd_usage(const cmd_tbl_t *cmdtp); + +/* Dummy ->cmd and ->cmd_rep wrappers. */ +int cmd_always_repeatable(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[], int *repeatable); +int cmd_never_repeatable(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[], int *repeatable); +int cmd_discard_repeatable(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]); + +static inline bool cmd_is_repeatable(cmd_tbl_t *cmdtp) +{ + return cmdtp->cmd_rep == cmd_always_repeatable; +} + +#ifdef CONFIG_AUTO_COMPLETE +extern int var_complete(int argc, char * const argv[], char last_char, int maxv, char *cmdv[]); +extern int cmd_auto_complete(const char *const prompt, char *buf, int *np, int *colp); +#endif + +/** + * cmd_process_error() - report and process a possible error + * + * @cmdtp: Command which caused the error + * @err: Error code (0 if none, -ve for error, like -EIO) + * @return 0 (CMD_RET_SUCCESS) if there is not error, + * 1 (CMD_RET_FAILURE) if an error is found + * -1 (CMD_RET_USAGE) if 'usage' error is found + */ +int cmd_process_error(cmd_tbl_t *cmdtp, int err); + +/* + * Monitor Command + * + * All commands use a common argument format: + * + * void function (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); + */ + +#if defined(CONFIG_CMD_MEMORY) || \ + defined(CONFIG_CMD_I2C) || \ + defined(CONFIG_CMD_ITEST) || \ + defined(CONFIG_CMD_PCI) || \ + defined(CONFIG_CMD_SETEXPR) +#define CMD_DATA_SIZE +extern int cmd_get_data_size(char* arg, int default_size); +#endif + +#ifdef CONFIG_CMD_BOOTD +extern int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +#endif +#ifdef CONFIG_CMD_BOOTM +extern int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +extern int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd); +#else +static inline int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd) +{ + return 0; +} +#endif + +extern int do_bootz(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); + +extern int do_booti(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); + +extern int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc, + char *const argv[]); + +extern int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +extern int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); + +extern unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc, + char * const argv[]); + +#if defined(CONFIG_CMD_NVEDIT_EFI) +extern int do_env_print_efi(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]); +extern int do_env_set_efi(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]); +#endif + +/* + * Error codes that commands return to cmd_process(). We use the standard 0 + * and 1 for success and failure, but add one more case - failure with a + * request to call cmd_usage(). But the cmd_process() function handles + * CMD_RET_USAGE itself and after calling cmd_usage() it will return 1. + * This is just a convenience for commands to avoid them having to call + * cmd_usage() all over the place. + */ +enum command_ret_t { + CMD_RET_SUCCESS, /* 0 = Success */ + CMD_RET_FAILURE, /* 1 = Failure */ + CMD_RET_USAGE = -1, /* Failure, please report 'usage' error */ +}; + +/** + * Process a command with arguments. We look up the command and execute it + * if valid. Otherwise we print a usage message. + * + * @param flag Some flags normally 0 (see CMD_FLAG_.. above) + * @param argc Number of arguments (arg 0 must be the command text) + * @param argv Arguments + * @param repeatable This function sets this to 0 if the command is not + * repeatable. If the command is repeatable, the value + * is left unchanged. + * @param ticks If ticks is not null, this function set it to the + * number of ticks the command took to complete. + * @return 0 if the command succeeded, 1 if it failed + */ +int cmd_process(int flag, int argc, char * const argv[], + int *repeatable, unsigned long *ticks); + +void fixup_cmdtable(cmd_tbl_t *cmdtp, int size); + +/** + * board_run_command() - Fallback function to execute a command + * + * When no command line features are enabled in U-Boot, this function is + * called to execute a command. Typically the function can look at the + * command and perform a few very specific tasks, such as booting the + * system in a particular way. + * + * This function is only used when CONFIG_CMDLINE is not enabled. + * + * In normal situations this function should not return, since U-Boot will + * simply hang. + * + * @cmdline: Command line string to execute + * @return 0 if OK, 1 for error + */ +int board_run_command(const char *cmdline); +#endif /* __ASSEMBLY__ */ + +/* + * Command Flags: + */ +#define CMD_FLAG_REPEAT 0x0001 /* repeat last command */ +#define CMD_FLAG_BOOTD 0x0002 /* command is from bootd */ +#define CMD_FLAG_ENV 0x0004 /* command is from the environment */ + +#ifdef CONFIG_AUTO_COMPLETE +# define _CMD_COMPLETE(x) x, +#else +# define _CMD_COMPLETE(x) +#endif +#ifdef CONFIG_SYS_LONGHELP +# define _CMD_HELP(x) x, +#else +# define _CMD_HELP(x) +#endif + +#ifdef CONFIG_NEEDS_MANUAL_RELOC +#define U_BOOT_SUBCMDS_RELOC(_cmdname) \ + static void _cmdname##_subcmds_reloc(void) \ + { \ + static int relocated; \ + \ + if (relocated) \ + return; \ + \ + fixup_cmdtable(_cmdname##_subcmds, \ + ARRAY_SIZE(_cmdname##_subcmds)); \ + relocated = 1; \ + } +#else +#define U_BOOT_SUBCMDS_RELOC(_cmdname) \ + static void _cmdname##_subcmds_reloc(void) { } +#endif + +#define U_BOOT_SUBCMDS_DO_CMD(_cmdname) \ + static int do_##_cmdname(cmd_tbl_t *cmdtp, int flag, int argc, \ + char * const argv[], int *repeatable) \ + { \ + cmd_tbl_t *subcmd; \ + \ + _cmdname##_subcmds_reloc(); \ + \ + /* We need at least the cmd and subcmd names. */ \ + if (argc < 2 || argc > CONFIG_SYS_MAXARGS) \ + return CMD_RET_USAGE; \ + \ + subcmd = find_cmd_tbl(argv[1], _cmdname##_subcmds, \ + ARRAY_SIZE(_cmdname##_subcmds)); \ + if (!subcmd || argc - 1 > subcmd->maxargs) \ + return CMD_RET_USAGE; \ + \ + if (flag == CMD_FLAG_REPEAT && \ + !cmd_is_repeatable(subcmd)) \ + return CMD_RET_SUCCESS; \ + \ + return subcmd->cmd_rep(subcmd, flag, argc - 1, \ + argv + 1, repeatable); \ + } + +#ifdef CONFIG_AUTO_COMPLETE +#define U_BOOT_SUBCMDS_COMPLETE(_cmdname) \ + static int complete_##_cmdname(int argc, char * const argv[], \ + char last_char, int maxv, \ + char *cmdv[]) \ + { \ + return complete_subcmdv(_cmdname##_subcmds, \ + ARRAY_SIZE(_cmdname##_subcmds), \ + argc - 1, argv + 1, last_char, \ + maxv, cmdv); \ + } +#else +#define U_BOOT_SUBCMDS_COMPLETE(_cmdname) +#endif + +#define U_BOOT_SUBCMDS(_cmdname, ...) \ + static cmd_tbl_t _cmdname##_subcmds[] = { __VA_ARGS__ }; \ + U_BOOT_SUBCMDS_RELOC(_cmdname) \ + U_BOOT_SUBCMDS_DO_CMD(_cmdname) \ + U_BOOT_SUBCMDS_COMPLETE(_cmdname) + +#ifdef CONFIG_CMDLINE +#define U_BOOT_CMDREP_MKENT_COMPLETE(_name, _maxargs, _cmd_rep, \ + _usage, _help, _comp) \ + { #_name, _maxargs, _cmd_rep, cmd_discard_repeatable, \ + _usage, _CMD_HELP(_help) _CMD_COMPLETE(_comp) } + +#define U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \ + _usage, _help, _comp) \ + { #_name, _maxargs, \ + _rep ? cmd_always_repeatable : cmd_never_repeatable, \ + _cmd, _usage, _CMD_HELP(_help) _CMD_COMPLETE(_comp) } + +#define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \ + ll_entry_declare(cmd_tbl_t, _name, cmd) = \ + U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \ + _usage, _help, _comp); + +#define U_BOOT_CMDREP_COMPLETE(_name, _maxargs, _cmd_rep, _usage, \ + _help, _comp) \ + ll_entry_declare(cmd_tbl_t, _name, cmd) = \ + U_BOOT_CMDREP_MKENT_COMPLETE(_name, _maxargs, _cmd_rep, \ + _usage, _help, _comp) + +#else +#define U_BOOT_SUBCMD_START(name) static cmd_tbl_t name[] = {}; +#define U_BOOT_SUBCMD_END + +#define _CMD_REMOVE(_name, _cmd) \ + int __remove_ ## _name(void) \ + { \ + if (0) \ + _cmd(NULL, 0, 0, NULL); \ + return 0; \ + } + +#define U_BOOT_CMDREP_MKENT_COMPLETE(_name, _maxargs, _cmd_rep, \ + _usage, _help, _comp) \ + { #_name, _maxargs, 0 ? _cmd_rep : NULL, NULL, _usage, \ + _CMD_HELP(_help) _CMD_COMPLETE(_comp) } + +#define U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, \ + _help, _comp) \ + { #_name, _maxargs, NULL, 0 ? _cmd : NULL, _usage, \ + _CMD_HELP(_help) _CMD_COMPLETE(_comp) } + +#define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, \ + _comp) \ + _CMD_REMOVE(sub_ ## _name, _cmd) + +#define U_BOOT_CMDREP_COMPLETE(_name, _maxargs, _cmd_rep, _usage, \ + _help, _comp) \ + _CMD_REMOVE(sub_ ## _name, _cmd_rep) + +#endif /* CONFIG_CMDLINE */ + +#define U_BOOT_CMD(_name, _maxargs, _rep, _cmd, _usage, _help) \ + U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, NULL) + +#define U_BOOT_CMD_MKENT(_name, _maxargs, _rep, _cmd, _usage, _help) \ + U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \ + _usage, _help, NULL) + +#define U_BOOT_SUBCMD_MKENT_COMPLETE(_name, _maxargs, _rep, _do_cmd, \ + _comp) \ + U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _do_cmd, \ + "", "", _comp) + +#define U_BOOT_SUBCMD_MKENT(_name, _maxargs, _rep, _do_cmd) \ + U_BOOT_SUBCMD_MKENT_COMPLETE(_name, _maxargs, _rep, _do_cmd, \ + NULL) + +#define U_BOOT_CMD_WITH_SUBCMDS(_name, _usage, _help, ...) \ + U_BOOT_SUBCMDS(_name, __VA_ARGS__) \ + U_BOOT_CMDREP_COMPLETE(_name, CONFIG_SYS_MAXARGS, do_##_name, \ + _usage, _help, complete_##_name) + +#endif /* __COMMAND_H */ |