diff options
Diffstat (limited to 'include/configs/at91sam9263ek.h')
| -rw-r--r-- | include/configs/at91sam9263ek.h | 241 |
1 files changed, 241 insertions, 0 deletions
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h new file mode 100644 index 0000000..3e7adf6 --- /dev/null +++ b/include/configs/at91sam9263ek.h @@ -0,0 +1,241 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * Configuation settings for the AT91SAM9263EK board. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * SoC must be defined first, before hardware.h is included. + * In this case SoC is defined in boards.cfg. + */ +#include <asm/hardware.h> + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#ifndef CONFIG_SYS_USE_BOOT_NORFLASH +#define CONFIG_SKIP_LOWLEVEL_INIT +#else +#define CONFIG_SYS_USE_NORFLASH +#endif + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_LEGACY + +/* LCD */ +#define LCD_BPP LCD_COLOR8 +#define CONFIG_LCD_LOGO 1 +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO 1 +#define CONFIG_LCD_INFO_BELOW_LOGO 1 +#define CONFIG_ATMEL_LCD 1 +#define CONFIG_ATMEL_LCD_BGR555 1 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 + +/* SDRAM */ +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 +#define CONFIG_SYS_SDRAM_SIZE 0x04000000 + +#define CONFIG_SYS_INIT_SP_ADDR \ + (ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) + +/* NOR flash, if populated */ +#ifdef CONFIG_SYS_USE_NORFLASH +#define PHYS_FLASH_1 0x10000000 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MAX_FLASH_SECT 256 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 + +#define CONFIG_SYS_MONITOR_SEC 1:0-3 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN (256 << 10) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x007E0000) +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SIZE) + +/* Address and size of Primary Environment Sector */ +#define CONFIG_ENV_SIZE 0x10000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "monitor_base=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \ + "update=" \ + "protect off ${monitor_base} +${filesize};" \ + "erase ${monitor_base} +${filesize};" \ + "cp.b ${fileaddr} ${monitor_base} ${filesize};" \ + "protect on ${monitor_base} +${filesize}\0" + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#define MASTER_PLL_MUL 171 +#define MASTER_PLL_DIV 14 +#define MASTER_PLL_OUT 3 + +/* clocks */ +#define CONFIG_SYS_MOR_VAL \ + (AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255)) +#define CONFIG_SYS_PLLAR_VAL \ + (AT91_PMC_PLLAR_29 | \ + AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \ + AT91_PMC_PLLXR_PLLCOUNT(63) | \ + AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \ + AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV)) + +/* PCK/2 = MCK Master Clock from PLLA */ +#define CONFIG_SYS_MCKR1_VAL \ + (AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \ + AT91_PMC_MCKR_MDIV_2) + +/* PCK/2 = MCK Master Clock from PLLA */ +#define CONFIG_SYS_MCKR2_VAL \ + (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \ + AT91_PMC_MCKR_MDIV_2) + +/* define PDC[31:16] as DATA[31:16] */ +#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 +/* no pull-up for D[31:16] */ +#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 +/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ +#define CONFIG_SYS_MATRIX_EBICSA_VAL \ + (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \ + AT91_MATRIX_CSA_EBI_CS1A) + +/* SDRAM */ +/* SDRAMC_MR Mode register */ +#define CONFIG_SYS_SDRC_MR_VAL1 0 +/* SDRAMC_TR - Refresh Timer register */ +#define CONFIG_SYS_SDRC_TR_VAL1 0x13C +/* SDRAMC_CR - Configuration register*/ +#define CONFIG_SYS_SDRC_CR_VAL \ + (AT91_SDRAMC_NC_9 | \ + AT91_SDRAMC_NR_13 | \ + AT91_SDRAMC_NB_4 | \ + AT91_SDRAMC_CAS_3 | \ + AT91_SDRAMC_DBW_32 | \ + (1 << 8) | /* Write Recovery Delay */ \ + (7 << 12) | /* Row Cycle Delay */ \ + (2 << 16) | /* Row Precharge Delay */ \ + (2 << 20) | /* Row to Column Delay */ \ + (5 << 24) | /* Active to Precharge Delay */ \ + (1 << 28)) /* Exit Self Refresh to Active Delay */ + +/* Memory Device Register -> SDRAM */ +#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM +#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE +#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH +#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR +#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL +#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ +#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ + +/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ +#define CONFIG_SYS_SMC0_SETUP0_VAL \ + (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ + AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) +#define CONFIG_SYS_SMC0_PULSE0_VAL \ + (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ + AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) +#define CONFIG_SYS_SMC0_CYCLE0_VAL \ + (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) +#define CONFIG_SYS_SMC0_MODE0_VAL \ + (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ + AT91_SMC_MODE_DBW_16 | \ + AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6)) + +/* user reset enable */ +#define CONFIG_SYS_RSTC_RMR_VAL \ + (AT91_RSTC_KEY | \ + AT91_RSTC_MR_URSTEN | \ + AT91_RSTC_MR_ERSTL(15)) + +/* Disable Watchdog */ +#define CONFIG_SYS_WDTC_WDMR_VAL \ + (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ + AT91_WDT_MR_WDV(0xfff) | \ + AT91_WDT_MR_WDDIS | \ + AT91_WDT_MR_WDD(0xfff)) + +#endif +#endif + +/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 +#endif + +/* Ethernet */ +#define CONFIG_RESET_PHY_R 1 +#define CONFIG_AT91_WANTS_COMMON_PHY + +/* USB */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END 0x23e00000 + +#ifdef CONFIG_SYS_USE_DATAFLASH + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CONFIG_ENV_OFFSET 0x4200 +#define CONFIG_ENV_SIZE 0x4200 +#define CONFIG_ENV_SECT_SIZE 0x210 +#define CONFIG_BOOTCOMMAND "sf probe 0; " \ + "sf read 0x22000000 0x84000 0x294000; " \ + "bootm 0x22000000" + +#elif CONFIG_SYS_USE_NANDFLASH + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_OFFSET 0x140000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" +#endif + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) + +#endif |