diff options
Diffstat (limited to 'include/configs/at91sam9m10g45ek.h')
| -rw-r--r-- | include/configs/at91sam9m10g45ek.h | 141 |
1 files changed, 141 insertions, 0 deletions
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h new file mode 100644 index 0000000..044c428 --- /dev/null +++ b/include/configs/at91sam9m10g45ek.h @@ -0,0 +1,141 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES). + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ + +#define CONFIG_AT91SAM9M10G45EK + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* general purpose I/O */ +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ + +/* LCD */ +#define LCD_BPP LCD_COLOR8 +#define CONFIG_LCD_LOGO +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO +#define CONFIG_LCD_INFO_BELOW_LOGO +#define CONFIG_ATMEL_LCD +#define CONFIG_ATMEL_LCD_RGB565 +/* board specific(not enough SRAM) */ +#define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE + +/* SDRAM */ +#define CONFIG_SYS_SDRAM_BASE 0x70000000 +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) + +/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_DBW_8 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 + +#endif + +/* Ethernet */ +#define CONFIG_RESET_PHY_R +#define CONFIG_AT91_WANTS_COMMON_PHY + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END 0x23e00000 + +#ifdef CONFIG_NAND_BOOT +/* bootstrap + u-boot + env in nandflash */ +#define CONFIG_ENV_OFFSET 0x140000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 +#define CONFIG_ENV_SIZE 0x20000 + +#define CONFIG_BOOTCOMMAND \ + "nand read 0x70000000 0x200000 0x300000;" \ + "bootm 0x70000000" +#elif CONFIG_SD_BOOT +/* bootstrap + u-boot + env + linux in mmc */ +#define CONFIG_ENV_SIZE 0x4000 + +#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \ + "fatload mmc 0:1 0x72000000 zImage; " \ + "bootz 0x72000000 - 0x71000000" +#endif + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) + +/* Defines for SPL */ +#define CONFIG_SPL_MAX_SIZE 0x010000 +#define CONFIG_SPL_STACK 0x310000 + +#define CONFIG_SYS_MONITOR_LEN 0x80000 + +#ifdef CONFIG_SD_BOOT + +#define CONFIG_SPL_BSS_START_ADDR 0x70000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 +#define CONFIG_SYS_SPL_MALLOC_START 0x70080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 + +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" + +#elif CONFIG_NAND_BOOT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_ECC +#define CONFIG_SPL_NAND_SOFTECC +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE + +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCSIZE 256 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ + 48, 49, 50, 51, 52, 53, 54, 55, \ + 56, 57, 58, 59, 60, 61, 62, 63, } +#endif + +#define CONFIG_SPL_ATMEL_SIZE +#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CONFIG_SYS_AT91_PLLA 0x20c73f03 +#define CONFIG_SYS_MCKR 0x1301 +#define CONFIG_SYS_MCKR_CSS 0x1302 + +#endif |