diff options
Diffstat (limited to 'include/configs/cm_fx6.h')
| -rw-r--r-- | include/configs/cm_fx6.h | 228 |
1 files changed, 228 insertions, 0 deletions
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h new file mode 100644 index 0000000..b957e9c --- /dev/null +++ b/include/configs/cm_fx6.h @@ -0,0 +1,228 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Config file for Compulab CM-FX6 board + * + * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ + * + * Author: Nikita Kiryanov <nikita@compulab.co.il> + */ + +#ifndef __CONFIG_CM_FX6_H +#define __CONFIG_CM_FX6_H + +#include "mx6_common.h" + +/* Machine config */ +#define CONFIG_SYS_LITTLE_ENDIAN +#define CONFIG_MACH_TYPE 4273 + +/* MMC */ +#define CONFIG_SYS_FSL_USDHC_NUM 3 +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR + +/* RAM */ +#define PHYS_SDRAM_1 MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_2 MMDC1_ARB_BASE_ADDR +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x10010000 +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* Serial console */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART4_BASE +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/* SPI flash */ + +/* MTD support */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SPI_FLASH_MTD +#endif + +/* Environment */ +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_ENV_OFFSET (768 * 1024) + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_addr_r=0x18000000\0" \ + "ramdisk_addr_r=0x13000000\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ + "fdtfile=undefined\0" \ + "stdin=serial,usbkbd\0" \ + "stdout=serial,vga\0" \ + "stderr=serial,vga\0" \ + "panel=HDMI\0" \ + "autoload=no\0" \ + "uImage=uImage-cm-fx6\0" \ + "zImage=zImage-cm-fx6\0" \ + "kernel=uImage-cm-fx6\0" \ + "dtb=cm-fx6.dtb\0" \ + "console=ttymxc3,115200\0" \ + "ethprime=FEC0\0" \ + "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \ + "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \ + "doboot=bootm ${kernel_addr_r}\0" \ + "doloadfdt=false\0" \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + "setboottypez=setenv kernel ${zImage};" \ + "setenv doboot bootz ${kernel_addr_r} - ${fdt_addr_r};" \ + "setenv doloadfdt true;\0" \ + "setboottypem=setenv kernel ${uImage};" \ + "setenv doboot bootm ${kernel_addr_r};" \ + "setenv doloadfdt false;\0"\ + "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ + "sataroot=/dev/sda2 rw rootwait\0" \ + "nandroot=/dev/mtdblock4 rw\0" \ + "nandrootfstype=ubifs\0" \ + "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \ + "${video} ${extrabootargs}\0" \ + "sataargs=setenv bootargs console=${console} root=${sataroot} " \ + "${video} ${extrabootargs}\0" \ + "nandargs=setenv bootargs console=${console} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype} " \ + "${video} ${extrabootargs}\0" \ + "nandboot=if run nandloadkernel; then " \ + "run nandloadfdt;" \ + "run setboottypem;" \ + "run storagebootcmd;" \ + "run setboottypez;" \ + "run storagebootcmd;" \ + "fi;\0" \ + "run_eboot=echo Starting EBOOT ...; "\ + "mmc dev 2 && " \ + "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \ + "loadkernel=load ${storagetype} ${storagedev} ${kernel_addr_r} ${kernel};\0"\ + "loadfdt=load ${storagetype} ${storagedev} ${fdt_addr_r} ${dtb};\0" \ + "nandloadkernel=nand read ${kernel_addr_r} 0 780000;\0" \ + "nandloadfdt=nand read ${fdt_addr_r} 780000 80000;\0" \ + "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \ + "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \ + "setupnandboot=setenv storagetype nand;\0" \ + "storagebootcmd=echo Booting from ${storagetype} ...;" \ + "run ${storagetype}args; run doboot;\0" \ + "trybootk=if run loadkernel; then " \ + "if ${doloadfdt}; then " \ + "run loadfdt;" \ + "fi;" \ + "run storagebootcmd;" \ + "fi;\0" \ + "trybootsmz=" \ + "run setboottypem;" \ + "run trybootk;" \ + "run setboottypez;" \ + "run trybootk;\0" \ + "legacy_bootcmd=" \ + "run setupmmcboot;" \ + "mmc dev ${storagedev};" \ + "if mmc rescan; then " \ + "run trybootsmz;" \ + "fi;" \ + "run setupsataboot;" \ + "if sata init; then " \ + "run trybootsmz;" \ + "fi;" \ + "run setupnandboot;" \ + "run nandboot;\0" \ + "findfdt="\ + "if test $board_name = Utilite && test $board_rev = MX6Q ; then " \ + "setenv fdtfile imx6q-utilite-pro.dtb; fi; " \ + "if test $fdtfile = undefined; then " \ + "echo WARNING: Could not determine dtb to use; fi; \0" \ + BOOTENV + +#define BOOT_TARGET_DEVICES(func) \ + func(USB, usb, 0) \ + func(MMC, mmc, 2) \ + func(SATA, sata, 0) + +#include <config_distro_bootcmd.h> +#else +#define CONFIG_EXTRA_ENV_SETTINGS +#endif + +/* NAND */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_MAX_CHIPS 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_ONFI_DETECTION +/* APBH DMA is required for NAND support */ +#endif + +/* Ethernet */ +#define CONFIG_FEC_MXC +#define CONFIG_FEC_MXC_PHYADDR 0 +#define CONFIG_FEC_XCV_TYPE RGMII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_PHY_ATHEROS +#define CONFIG_ETHPRIME "FEC0" +#define CONFIG_ARP_TIMEOUT 200UL +#define CONFIG_NET_RETRY_COUNT 5 + +/* USB */ +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ +#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_MXC_I2C3_SPEED 400000 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_BUS 2 + +/* SATA */ +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_LBA48 +#define CONFIG_DWC_AHSATA_PORT_ID 0 +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR + +/* Boot */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) +#define CONFIG_SERIAL_TAG + +/* misc */ +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) + +/* SPL */ +#include "imx6_spl.h" + +/* Display */ +#define CONFIG_IMX_HDMI + +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SOURCE +#define CONFIG_VIDEO_BMP_RLE8 + +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO + +/* EEPROM */ +#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 +#define CONFIG_SYS_EEPROM_SIZE 256 + +#endif /* __CONFIG_CM_FX6_H */ |