diff options
Diffstat (limited to 'include/configs/colibri-imx6ull.h')
| -rw-r--r-- | include/configs/colibri-imx6ull.h | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h new file mode 100644 index 0000000..de94eb9 --- /dev/null +++ b/include/configs/colibri-imx6ull.h @@ -0,0 +1,166 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018-2019 Toradex AG + * + * Configuration settings for the Colibri iMX6ULL module. + * + * based on colibri_imx7.h + */ + +#ifndef __COLIBRI_IMX6ULL_CONFIG_H +#define __COLIBRI_IMX6ULL_CONFIG_H + +#include "mx6_common.h" +#define CONFIG_IOMUX_LPSR + +#define PHYS_SDRAM_SIZE SZ_512M + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) + +/* Network */ +#define CONFIG_TFTP_TSIZE + +/* ENET1 */ +#define IMX_FEC_BASE ENET2_BASE_ADDR + +/* MMC Config */ +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 1 + +/* I2C configs */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_IPADDR 192.168.10.2 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.168.10.1 + +#define FDT_FILE "imx6ull-colibri${variant}-${fdt_board}.dtb" + +#define MEM_LAYOUT_ENV_SETTINGS \ + "bootm_size=0x10000000\0" \ + "fdt_addr_r=0x82100000\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "kernel_addr_r=0x81000000\0" \ + "pxefile_addr_r=0x87100000\0" \ + "ramdisk_addr_r=0x82200000\0" \ + "scriptaddr=0x87000000\0" + +#define NFS_BOOTCMD \ + "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ + "nfsboot=run setup; " \ + "setenv bootargs ${defargs} ${nfsargs} " \ + "${setupargs} ${vidargs}; echo Booting from NFS...;" \ + "dhcp ${kernel_addr_r} && " \ + "tftp ${fdt_addr_r} " FDT_FILE " && " \ + "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ + +#define UBI_BOOTCMD \ + "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \ + "ubi.fm_autoconvert=1\0" \ + "ubiboot=run setup; " \ + "setenv bootargs ${defargs} ${ubiargs} " \ + "${setupargs} ${vidargs}; echo Booting from NAND...; " \ + "ubi part ubi &&" \ + "ubi read ${kernel_addr_r} kernel && " \ + "ubi read ${fdt_addr_r} dtb && " \ + "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ + +#define CONFIG_BOOTCOMMAND "run ubiboot; " \ + "setenv fdtfile " FDT_FILE " && run distro_bootcmd;" + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> + +#define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + BOOTENV \ + MEM_LAYOUT_ENV_SETTINGS \ + NFS_BOOTCMD \ + UBI_BOOTCMD \ + "console=ttymxc0\0" \ + "defargs=user_debug=30\0" \ + "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ + "fdt_board=eval-v3\0" \ + "fdt_fixup=;\0" \ + "ip_dyn=yes\0" \ + "kernel_file=zImage\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ + "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ + "${board}/flash_eth.img && source ${loadaddr}\0" \ + "setsdupdate=mmc rescan && setenv interface mmc && " \ + "fatload ${interface} 0:1 ${loadaddr} " \ + "${board}/flash_blk.img && source ${loadaddr}\0" \ + "setup=setenv setupargs " \ + "console=tty1 console=${console}" \ + ",${baudrate}n8 ${memargs} consoleblank=0\0" \ + "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ + "setusbupdate=usb start && setenv interface usb && " \ + "fatload ${interface} 0:1 ${loadaddr} " \ + "${board}/flash_blk.img && source ${loadaddr}\0" \ + "splashpos=m,m\0" \ + "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \ + "vidargs=video=mxsfb:640x480M-16@60" + +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x08000000) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* Physical Memory Map */ +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#if defined(CONFIG_ENV_IS_IN_NAND) +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_OFFSET (28 * CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#endif + +/* NAND stuff */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +/* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */ +#define CONFIG_SYS_NAND_BASE -1 +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* USB Configs */ +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET + +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + +#define CONFIG_IMX_THERMAL + +#define CONFIG_USBD_HS + +/* USB Device Firmware Update support */ +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M +#define DFU_DEFAULT_POLL_TIMEOUT 300 + +#if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO) +#define CONFIG_VIDEO_MXS +#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR +#define CONFIG_VIDEO_LOGO +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_VIDEO_BMP_LOGO +#endif + +#endif /* __COLIBRI_IMX6ULL_CONFIG_H */ |