diff options
Diffstat (limited to 'include/configs/dns325.h')
| -rw-r--r-- | include/configs/dns325.h | 118 |
1 files changed, 118 insertions, 0 deletions
diff --git a/include/configs/dns325.h b/include/configs/dns325.h new file mode 100644 index 0000000..f72ee90 --- /dev/null +++ b/include/configs/dns325.h @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2011 + * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net> + * + * Based on Kirkwood support: + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + */ + +#ifndef _CONFIG_DNS325_H +#define _CONFIG_DNS325_H + +/* + * Machine number definition + */ +#define CONFIG_MACH_TYPE MACH_TYPE_DNS325 + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ +#define CONFIG_KW88F6281 /* SOC Name */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ + +/* + * Commands configuration + */ + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* Remove or override few declarations from mv-common.h */ + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ +#define CONFIG_NETCONSOLE +#endif + +/* + * SATA Driver configuration + */ +#ifdef CONFIG_MVSATA_IDE +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET +#endif + +/* + * Enable GPI0 support + */ +#define CONFIG_KIRKWOOD_GPIO + +/* + * Environment variables configurations + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */ +#endif + +#define CONFIG_ENV_SIZE 0x20000 /* 128KB */ +#define CONFIG_ENV_ADDR 0xe0000 +#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */ + +/* + * Default environment variables + */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" \ + "loadaddr=0x800000\0" \ + "autoload=no\0" \ + "console=ttyS0,115200\0" \ + "mtdparts="CONFIG_MTDPARTS_DEFAULT \ + "optargs=\0" \ + "bootenv=uEnv.txt\0" \ + "importbootenv=echo Importing environment ...; " \ + "env import -t ${loadaddr} ${filesize}\0" \ + "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \ + "setbootargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "${mtdparts} " \ + "root=${bootenvroot} " \ + "rootfstype=${bootenvrootfstype}\0" \ + "subbootcmd=run setbootargs; " \ + "if run bootenvloadimage; then " \ + "bootm ${loadaddr};" \ + "fi;\0" \ + "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \ + "nandrootfstype=ubifs\0" \ + "nandloadimage=nand read ${loadaddr} kernel\0" \ + "setnandbootenv=echo Booting from nand ...; " \ + "setenv bootenvroot ${nandroot}; " \ + "setenv bootenvrootfstype ${nandrootfstype}; " \ + "setenv bootenvloadimage ${nandloadimage}\0" + +#define CONFIG_BOOTCOMMAND \ + "if test -n ${bootenv} && usb start; then " \ + "if run loadbootenv; then " \ + "echo Loaded environment ${bootenv} from usb;" \ + "run importbootenv;" \ + "fi;" \ + "if test -n ${bootenvcmd}; then " \ + "echo Running bootenvcmd ...;" \ + "run bootenvcmd;" \ + "fi;" \ + "fi;" \ + "run setnandbootenv subbootcmd;" + +#endif /* _CONFIG_DNS325_H */ |