diff options
Diffstat (limited to 'include/configs/gplugd.h')
| -rw-r--r-- | include/configs/gplugd.h | 80 |
1 files changed, 80 insertions, 0 deletions
diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h new file mode 100644 index 0000000..7da8739 --- /dev/null +++ b/include/configs/gplugd.h @@ -0,0 +1,80 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2011 + * eInfochips Ltd. <www.einfochips.com> + * Written-by: Ajay Bhargav <contact@8051projects.net> + * + * Based on Aspenite: + * (C) Copyright 2010 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * Contributor: Mahavir Jain <mjain@marvell.com> + */ + +#ifndef __CONFIG_GPLUGD_H +#define __CONFIG_GPLUGD_H + +/* + * High Level Configuration Options + */ +#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ +#define CONFIG_ARMADA100 1 /* SOC Family Name */ +#define CONFIG_ARMADA168 1 /* SOC Used on this Board */ +#define CONFIG_MACH_TYPE MACH_TYPE_GPLUGD /* Machine type */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ + +/* + * There is no internal RAM in ARMADA100, using DRAM + * TBD: dcache to be used for this + */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) + +/* + * Commands configuration + */ + +/* Network configuration */ +#ifdef CONFIG_CMD_NET +#define CONFIG_ARMADA100_FEC + +/* DHCP Support */ +#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000 +#endif /* CONFIG_CMD_NET */ + +/* GPIO Support */ +#define CONFIG_MARVELL_GPIO + +/* PHY configuration */ +#define CONFIG_RESET_PHY_R +/* 88E3015 register definition */ +#define PHY_LED_PAR_SEL_REG 22 +#define PHY_LED_MAN_REG 25 +#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */ +/* GPIO Configuration for PHY */ +#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */ + +/* Flash Support */ + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +#ifdef CONFIG_SYS_NS16550_COM1 +#undef CONFIG_SYS_NS16550_COM1 +#endif /* CONFIG_SYS_NS16550_COM1 */ + +#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE + +/* + * Environment variables configurations + */ +#define CONFIG_ENV_SIZE 0x4000 + +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI_ARMADA100 +#define CONFIG_EHCI_IS_TDI +#endif /* CONFIG_CMD_USB */ + +#endif /* __CONFIG_GPLUGD_H */ |