diff options
Diffstat (limited to 'include/configs/gw_ventana.h')
-rw-r--r-- | include/configs/gw_ventana.h | 341 |
1 files changed, 341 insertions, 0 deletions
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h new file mode 100644 index 0000000..a27627e --- /dev/null +++ b/include/configs/gw_ventana.h @@ -0,0 +1,341 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2013 Gateworks Corporation + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* SPL */ +/* Location in NAND to read U-Boot from */ +#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M) + +/* Falcon Mode */ +#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 + +/* Falcon Mode - NAND support: args@17MB kernel@18MB */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M) + +/* Falcon Mode - MMC support: args@1MB kernel@2MB */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) +#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */ + +#include "imx6_spl.h" /* common IMX6 SPL configuration */ +#include "mx6_common.h" + +#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */ + +/* Serial ATAG */ +#define CONFIG_SERIAL_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) + +/* Init Functions */ + +/* Driver Model */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_DM_GPIO +#define CONFIG_DM_THERMAL +#endif + +/* Thermal */ +#define CONFIG_IMX_THERMAL + +/* Serial */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART2_BASE + +#ifdef CONFIG_SPI_FLASH + +/* SPI */ +#ifdef CONFIG_CMD_SF + #define CONFIG_SPI_FLASH_MTD + /* GPIO 3-19 (21248) */ +#endif + +#elif defined(CONFIG_SPL_NAND_SUPPORT) +/* Enable NAND support */ +#ifdef CONFIG_CMD_NAND + #define CONFIG_SYS_MAX_NAND_DEVICE 1 + #define CONFIG_SYS_NAND_BASE 0x40000000 + #define CONFIG_SYS_NAND_5_ADDR_CYCLE + #define CONFIG_SYS_NAND_ONFI_DETECTION + + /* DMA stuff, needed for GPMI/MXS NAND support */ +#endif + +#endif /* CONFIG_SPI_FLASH */ + +/* I2C Configs */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ +#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_I2C_GSC 0 +#define CONFIG_I2C_EDID + +/* MMC Configs */ +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +/* + * SATA Configs + */ +#ifdef CONFIG_CMD_SATA + #define CONFIG_SYS_SATA_MAX_DEVICE 1 + #define CONFIG_DWC_AHSATA_PORT_ID 0 + #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR + #define CONFIG_LBA48 +#endif + +/* + * PCI express + */ +#ifdef CONFIG_CMD_PCI +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_PCI_FIXUP_DEV +#define CONFIG_PCIE_IMX +#endif + +/* + * PMIC + */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE100 +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 +#define CONFIG_POWER_LTC3676 +#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c + +/* Various command support */ +#define CONFIG_CMD_UNZIP /* gzwrite */ + +/* Ethernet support */ +#define CONFIG_FEC_MXC +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_FEC_MXC_PHYADDR 0 +#define CONFIG_ARP_TIMEOUT 200UL + +/* USB Configs */ +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USBD_HS +#define CONFIG_NETCONSOLE + +/* Framebuffer and LCD */ +#define CONFIG_VIDEO_LOGO +#define CONFIG_IMX_HDMI +#define CONFIG_IMX_VIDEO_SKIP +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */ + +/* Miscellaneous configurable options */ +#define CONFIG_HWCONFIG + +/* Memory configuration */ +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x10010000 +#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 + +/* Physical Memory Map */ +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* + * MTD Command for mtdparts + */ + +/* Persistent Environment Config */ +#if defined(CONFIG_ENV_IS_IN_MMC) + #define CONFIG_SYS_MMC_ENV_DEV 0 + #define CONFIG_SYS_MMC_ENV_PART 1 + #define CONFIG_ENV_OFFSET (709 * SZ_1K) + #define CONFIG_ENV_SIZE (128 * SZ_1K) + #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (128 * SZ_1K)) +#elif defined(CONFIG_ENV_IS_IN_NAND) + #define CONFIG_ENV_OFFSET (16 * SZ_1M) + #define CONFIG_ENV_SECT_SIZE (128 * SZ_1K) + #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE + #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 * SZ_1K)) + #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) + #define CONFIG_ENV_OFFSET (512 * SZ_1K) + #define CONFIG_ENV_SECT_SIZE (64 * SZ_1K) + #define CONFIG_ENV_SIZE (8 * SZ_1K) +#endif + +/* Environment */ +#define CONFIG_IPADDR 192.168.1.1 +#define CONFIG_SERVERIP 192.168.1.146 + +#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \ + "pcidisable=1\0" \ + "splashpos=m,m\0" \ + "usb_pgood_delay=2000\0" \ + "console=ttymxc1\0" \ + "bootdevs=usb mmc sata flash\0" \ + "hwconfig=_UNKNOWN_\0" \ + "video=\0" \ + \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ + "disk=0\0" \ + "part=1\0" \ + \ + "fdt_high=0xffffffff\0" \ + "fdt_addr=0x18000000\0" \ + "initrd_high=0xffffffff\0" \ + "fixfdt=" \ + "fdt addr ${fdt_addr}\0" \ + "bootdir=boot\0" \ + "loadfdt=" \ + "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \ + "echo Loaded DTB from ${bootdir}/${fdt_file}; " \ + "run fixfdt; " \ + "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \ + "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \ + "run fixfdt; " \ + "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \ + "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \ + "run fixfdt; " \ + "fi\0" \ + \ + "fs=ext4\0" \ + "script=6x_bootscript-ventana\0" \ + "loadscript=" \ + "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \ + "source ${loadaddr}; " \ + "fi\0" \ + \ + "uimage=uImage\0" \ + "mmc_root=mmcblk0p1\0" \ + "mmc_boot=" \ + "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \ + "mmc dev ${disk} && mmc rescan && " \ + "setenv dtype mmc; run loadscript; " \ + "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \ + "setenv bootargs console=${console},${baudrate} " \ + "root=/dev/${mmc_root} rootfstype=${fs} " \ + "rootwait rw ${video} ${extra}; " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "bootm; " \ + "fi; " \ + "fi\0" \ + \ + "sata_boot=" \ + "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \ + "sata init && " \ + "setenv dtype sata; run loadscript; " \ + "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \ + "setenv bootargs console=${console},${baudrate} " \ + "root=/dev/sda1 rootfstype=${fs} " \ + "rootwait rw ${video} ${extra}; " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "bootm; " \ + "fi; " \ + "fi\0" \ + "usb_boot=" \ + "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \ + "usb start && usb dev ${disk} && " \ + "setenv dtype usb; run loadscript; " \ + "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \ + "setenv bootargs console=${console},${baudrate} " \ + "root=/dev/sda1 rootfstype=${fs} " \ + "rootwait rw ${video} ${extra}; " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "bootm; " \ + "fi; " \ + "fi\0" + +#ifdef CONFIG_SPI_FLASH + #define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_EXTRA_ENV_SETTINGS_COMMON \ + "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \ + "image_uboot=ventana/u-boot_spi.imx\0" \ + \ + "spi_koffset=0x90000\0" \ + "spi_klen=0x200000\0" \ + \ + "spi_updateuboot=echo Updating uboot from " \ + "${serverip}:${image_uboot}...; " \ + "tftpboot ${loadaddr} ${image_uboot} && " \ + "sf probe && sf erase 0 80000 && " \ + "sf write ${loadaddr} 400 ${filesize}\0" \ + "spi_update=echo Updating OS from ${serverip}:${image_os} " \ + "to ${spi_koffset} ...; " \ + "tftp ${loadaddr} ${image_os} && " \ + "sf probe && " \ + "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \ + \ + "flash_boot=" \ + "if sf probe && " \ + "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \ + "setenv bootargs console=${console},${baudrate} " \ + "root=/dev/mtdblock3 " \ + "rootfstype=squashfs,jffs2 " \ + "${video} ${extra}; " \ + "bootm; " \ + "fi\0" +#else + #define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_EXTRA_ENV_SETTINGS_COMMON \ + \ + "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \ + "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \ + "tftp ${loadaddr} ${image_rootfs} && " \ + "nand erase.part rootfs && " \ + "nand write ${loadaddr} rootfs ${filesize}\0" \ + \ + "flash_boot=" \ + "setenv fsload 'ubifsload'; " \ + "ubi part rootfs; " \ + "if ubi check boot; then " \ + "ubifsmount ubi0:boot; " \ + "setenv root ubi0:rootfs ubi.mtd=2 " \ + "rootfstype=squashfs,ubifs; " \ + "setenv bootdir; " \ + "elif ubi check rootfs; then " \ + "ubifsmount ubi0:rootfs; " \ + "setenv root ubi0:rootfs ubi.mtd=2 " \ + "rootfstype=ubifs; " \ + "fi; " \ + "setenv dtype nand; run loadscript; " \ + "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \ + "setenv bootargs console=${console},${baudrate} " \ + "root=${root} ${video} ${extra}; " \ + "if run loadfdt; then " \ + "ubifsumount; " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "ubifsumount; bootm; " \ + "fi; " \ + "fi\0" +#endif + +#define CONFIG_BOOTCOMMAND \ + "for btype in ${bootdevs}; do " \ + "echo; echo Attempting ${btype} boot...; " \ + "if run ${btype}_boot; then; fi; " \ + "done" + +#endif /* __CONFIG_H */ |