diff options
Diffstat (limited to 'include/configs/ls1012afrwy.h')
| -rw-r--r-- | include/configs/ls1012afrwy.h | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h new file mode 100644 index 0000000..1b0f156 --- /dev/null +++ b/include/configs/ls1012afrwy.h @@ -0,0 +1,143 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef __LS1012AFRWY_H__ +#define __LS1012AFRWY_H__ + +#include "ls1012a_common.h" + +/* Board Rev*/ +#define BOARD_REV_A_B 0x0 +#define BOARD_REV_C 0x00080000 +#define BOARD_REV_MASK 0x001A0000 +/* DDR */ +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 +#define SYS_SDRAM_SIZE_512 0x20000000 +#define SYS_SDRAM_SIZE_1024 0x40000000 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 +#define CONFIG_CMD_MEMINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +/* ENV */ +#define CONFIG_SYS_FSL_QSPI_BASE 0x40000000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FSL_QSPI_BASE + \ + CONFIG_ENV_OFFSET) + +#ifndef CONFIG_SPL_BUILD +#undef BOOT_TARGET_DEVICES +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) +#endif + +#undef CONFIG_ENV_OFFSET +#define CONFIG_ENV_OFFSET 0x1D0000 +#undef FSL_QSPI_FLASH_SIZE +#define FSL_QSPI_FLASH_SIZE SZ_16M +#undef CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_SECT_SIZE 0x10000 /*64 KB*/ +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_SIZE 0x10000 /*64 KB*/ + +/* MMC */ +#ifdef CONFIG_MMC +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#endif + +#define CONFIG_PCIE1 /* PCIE controller 1 */ + +#define CONFIG_PCI_SCAN_SHOW + +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=no\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "fdt_addr=0x00f00000\0" \ + "kernel_addr=0x01000000\0" \ + "kernel_size_sd=0x16000\0" \ + "kernelhdr_size_sd=0x10\0" \ + "kernel_addr_sd=0x8000\0" \ + "kernelhdr_addr_sd=0x4000\0" \ + "kernelheader_addr=0x1fc000\0" \ + "kernelheader_addr=0x1fc000\0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "kernelheader_size=0x40000\0" \ + "kernel_addr_r=0x81000000\0" \ + "fdt_addr_r=0x90000000\0" \ + "load_addr=0x96000000\0" \ + "kernel_size=0x2800000\0" \ + "kernelheader_size=0x40000\0" \ + "console=ttyS0,115200\0" \ + BOOTENV \ + "boot_scripts=ls1012afrwy_boot.scr\0" \ + "boot_script_hdr=hdr_ls1012afrwy_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr}; " \ + "env exists secureboot " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ + "installer=load mmc 0:2 $load_addr " \ + "/flex_installer_arm64.itb; " \ + "bootm $load_addr#$board\0" \ + "qspi_bootcmd=echo Trying load from qspi..;" \ + "sf probe && sf read $load_addr " \ + "$kernel_addr $kernel_size; env exists secureboot " \ + "&& sf read $kernelheader_addr_r $kernelheader_addr " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ + "bootm $load_addr#$board\0" \ + "sd_bootcmd=echo Trying load from sd card..;" \ + "mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd ;" \ + "env exists secureboot && mmc read $kernelheader_addr_r "\ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" + +#undef CONFIG_BOOTCOMMAND +#ifdef CONFIG_TFABOOT +#undef QSPI_NOR_BOOTCOMMAND +#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\ + "env exists secureboot && esbc_halt;" +#else +#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\ + "env exists secureboot && esbc_halt;" +#endif +#define CONFIG_CMD_MEMINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +#include <asm/fsl_secure_boot.h> + +#include <asm/fsl_secure_boot.h> +#endif /* __LS1012AFRWY_H__ */ |