diff options
Diffstat (limited to 'include/configs/lsxl.h')
| -rw-r--r-- | include/configs/lsxl.h | 139 |
1 files changed, 139 insertions, 0 deletions
diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h new file mode 100644 index 0000000..3ba5548 --- /dev/null +++ b/include/configs/lsxl.h @@ -0,0 +1,139 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2012 Michael Walle + * Michael Walle <michael@walle.cc> + */ + +#ifndef _CONFIG_LSXL_H +#define _CONFIG_LSXL_H + +/* + * Version number information + */ +#if defined(CONFIG_LSCHLV2) +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg +#define CONFIG_MACH_TYPE 3006 +#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ +#elif defined(CONFIG_LSXHL) +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg +#define CONFIG_MACH_TYPE 2663 +/* CONFIG_SYS_TCLK is 200000000 by default */ +#else +#error "unknown board" +#endif + +/* + * General configuration options + */ +#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ +#define CONFIG_KW88F6281 /* SOC Name */ + +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ + +#define CONFIG_KIRKWOOD_GPIO + +/* + * Commands configuration + */ + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* loading initramfs images without uimage header */ + +/* + * Environment variables configurations + */ +#ifdef CONFIG_SPI_FLASH +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 8 +#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */ +#endif + +#define CONFIG_ENV_SIZE 0x10000 /* 64k */ +#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ + +/* + * Default environment variables + */ +#define CONFIG_LOADADDR 0x00800000 + +#if defined(CONFIG_LSXHL) +#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" +#elif defined(CONFIG_LSCHLV2) +#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" +#else +#error "Unsupported board" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootsource=legacy\0" \ + "hdpart=0:1\0" \ + "kernel_addr=0x00800000\0" \ + "ramdisk_addr=0x01000000\0" \ + "fdt_addr=0x00ff0000\0" \ + "bootcmd_legacy=sata init " \ + "&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\ + "&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ + "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ + "&& tftpboot ${ramdisk_addr} initrd.img " \ + "&& setenv ramdisk_len ${filesize} " \ + "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ + "&& bootz ${kernel_addr} " \ + "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ + "bootcmd_hdd=sata init " \ + "&& load sata ${hdpart} ${kernel_addr} /vmlinuz " \ + "&& load sata ${hdpart} ${ramdisk_addr} /initrd.img " \ + "&& setenv ramdisk_len ${filesize} " \ + "&& load sata ${hdpart} ${fdt_addr} /dtb " \ + "&& bootz ${kernel_addr} " \ + "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ + "bootcmd_usb=usb start " \ + "&& load usb 0:1 ${kernel_addr} /vmlinuz " \ + "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \ + "&& setenv ramdisk_len ${filesize} " \ + "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \ + "&& bootz ${kernel_addr} " \ + "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ + "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ + "eraseenv=sf probe 0 " \ + "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ + " +" __stringify(CONFIG_ENV_SIZE) "\0" \ + "config_nc_dhcp=setenv autoload_old ${autoload}; " \ + "setenv autoload no " \ + "&& bootp " \ + "&& setenv ncip " \ + "&& setenv autoload ${autoload_old}; " \ + "setenv autoload_old\0" \ + "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ + "setenv ncip; setenv gatewayip; setenv ethact; " \ + "setenv bootfile; setenv dnsip; " \ + "setenv bootsource legacy; run ser\0" \ + "restore_env=run standard_env; saveenv; reset\0" \ + "ser=setenv stdin serial; setenv stdout serial; " \ + "setenv stderr serial\0" \ + "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */ +#define CONFIG_PHY_BASE_ADR 7 +#undef CONFIG_RESET_PHY_R +#endif /* CONFIG_CMD_NET */ + +#ifdef CONFIG_SATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_SYS_64BIT_LBA +#define CONFIG_LBA48 +#endif + +#endif /* _CONFIG_LSXL_H */ |