diff options
Diffstat (limited to 'include/configs/mx53ppd.h')
| -rw-r--r-- | include/configs/mx53ppd.h | 214 |
1 files changed, 214 insertions, 0 deletions
diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h new file mode 100644 index 0000000..59988ef --- /dev/null +++ b/include/configs/mx53ppd.h @@ -0,0 +1,214 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Jason Liu <r64343@freescale.com> + * + * Configuration settings for Freescale MX53 low cost board. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> + +#define CONSOLE_DEV "ttymxc0" + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +#define CONFIG_SYS_FSL_CLK + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) + +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_REVISION_TAG + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE + +/* Eth Configs */ + +#define CONFIG_FEC_MXC +#define IMX_FEC_BASE FEC_BASE_ADDR +#define CONFIG_FEC_MXC_PHYADDR 0x1F + +/* USB Configs */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 + +#define CONFIG_SYS_RTC_BUS_NUM 2 +#define CONFIG_SYS_I2C_RTC_ADDR 0x30 + +/* I2C Configs */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ +#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ + +/* PMIC Controller */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_DIALOG_POWER +#define CONFIG_POWER_FSL +#define CONFIG_POWER_FSL_MC13892 +#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 +#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ + +#define CONFIG_ETHPRIME "FEC0" + +#define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */ + +#define PPD_CONFIG_NFS \ + "nfsserver=192.168.252.95\0" \ + "gatewayip=192.168.252.95\0" \ + "netmask=255.255.255.0\0" \ + "ipaddr=192.168.252.99\0" \ + "kernsize=0x2000\0" \ + "use_dhcp=0\0" \ + "nfsroot=/opt/springdale/rd\0" \ + "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs " \ + "${kern_ipconf} nfsroot=${nfsserver}:${nfsroot},v3,tcp rw\0" \ + "choose_ip=if test $use_dhcp = 1; then setenv kern_ipconf ip=dhcp; " \ + "setenv getcmd dhcp; else setenv kern_ipconf " \ + "ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off; " \ + "setenv getcmd tftp; fi\0" \ + "nfs=run choose_ip setargs bootargs_nfs; ${getcmd} ${loadaddr} " \ + "${nfsserver}:${image}; bootm ${loadaddr}\0" \ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + PPD_CONFIG_NFS \ + "image=/boot/fitImage\0" \ + "fdt_high=0xffffffff\0" \ + "dev=mmc\0" \ + "devnum=2\0" \ + "rootdev=mmcblk0p\0" \ + "quiet=quiet loglevel=0\0" \ + "console=" CONSOLE_DEV "\0" \ + "lvds=ldb\0" \ + "setargs=setenv bootargs ${lvds} jtag=on mem=2G " \ + "vt.global_cursor_default=0 bootcause=${bootcause} ${quiet} " \ + "console=${console} ${rtc_status}\0" \ + "bootargs_emmc=setenv bootargs root=/dev/${rootdev}${partnum} ro " \ + "rootwait ${bootargs}\0" \ + "doquiet=if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \ + "then setenv quiet; fi\0" \ + "hasfirstboot=ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \ + "/boot/bootcause/firstboot\0" \ + "swappartitions=setexpr partnum 3 - ${partnum}\0" \ + "failbootcmd=" \ + "ppd_lcd_enable; " \ + "msg=\"Monitor failed to start. " \ + "Try again, or contact GE Service for support.\"; " \ + "echo $msg; " \ + "setenv stdout vga; " \ + "echo \"\n\n\n\n \" $msg; " \ + "setenv stdout serial; " \ + "mw.b 0x7000A000 0xbc; " \ + "mw.b 0x7000A001 0x00; " \ + "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \ + "altbootcmd=" \ + "run doquiet; " \ + "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \ + "run hasfirstboot || setenv partnum 0; " \ + "if test ${partnum} != 0; then " \ + "setenv bootcause REVERT; " \ + "run swappartitions loadimage doboot; " \ + "fi; " \ + "run failbootcmd\0" \ + "loadimage=" \ + "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \ + "doboot=" \ + "echo Booting from ${dev}:${devnum}:${partnum} ...; " \ + "run setargs; " \ + "run bootargs_emmc; " \ + "bootm ${loadaddr}\0" \ + "tryboot=" \ + "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \ + "run loadimage || run swappartitions && run loadimage || " \ + "setenv partnum 0 && echo MISSING IMAGE;" \ + "run doboot; " \ + "run failbootcmd\0" \ + "video-mode=" \ + "lcd:800x480-24@60,monitor=lcd\0" \ + +#define CONFIG_MMCBOOTCOMMAND \ + "if mmc dev ${devnum}; then " \ + "run doquiet; " \ + "run tryboot; " \ + "fi; " \ + +#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND + +#define CONFIG_ARP_TIMEOUT 200UL + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ + +#define CONFIG_SYS_MAXARGS 48 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x70000000 +#define CONFIG_SYS_MEMTEST_END 0x70010000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* Physical Memory Map */ +#define PHYS_SDRAM_1 CSD0_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size) +#define PHYS_SDRAM_2 CSD1_BASE_ADDR +#define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size) +#define PHYS_SDRAM_SIZE (gd->ram_size) + +#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) +#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_ENV_OFFSET (12 * 64 * 1024) +#define CONFIG_ENV_SIZE (10 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#define CONFIG_CMD_FUSE +#define CONFIG_FSL_IIM + +#define CONFIG_SYS_I2C_SPEED 100000 + +/* I2C1 */ +#define CONFIG_SYS_NUM_I2C_BUSES 9 +#define CONFIG_SYS_I2C_MAX_HOPS 1 +#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ + {0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \ + {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ + {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \ + {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \ + {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \ + {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \ + {0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \ + {0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \ + } + +#define CONFIG_BCH + +/* Backlight Control */ +#define CONFIG_IMX6_PWM_PER_CLK 66666000 + +#endif /* __CONFIG_H */ |