1 files changed, 116 insertions, 0 deletions
diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h
new file mode 100644
index 0000000..af6004e
--- /dev/null
+++ b/include/configs/odroid_xu3.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ * Hyungwon Hwang <human.hwang@samsung.com>
+ */
+
+#ifndef __CONFIG_ODROID_XU3_H
+#define __CONFIG_ODROID_XU3_H
+
+#include <configs/exynos5420-common.h>
+#include <configs/exynos5-common.h>
+
+#define CONFIG_BOARD_COMMON
+
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+
+/* select serial console configuration */
+
+#define TZPC_BASE_OFFSET		0x10000
+
+#define SDRAM_BANK_SIZE			(256UL << 20UL)	/* 256 MB */
+/* Reserve the last 22 MiB for the secure firmware */
+#define CONFIG_SYS_MEM_TOP_HIDE		(22UL << 20UL)
+#define CONFIG_TZSW_RESERVED_DRAM_SIZE	CONFIG_SYS_MEM_TOP_HIDE
+
+#undef CONFIG_ENV_SIZE
+#undef CONFIG_ENV_OFFSET
+#define CONFIG_ENV_SIZE			(SZ_1K * 16)
+#define CONFIG_ENV_OFFSET		(SZ_1K * 3136) /* ~3 MiB offset */
+
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
+#define CONFIG_DEFAULT_CONSOLE		"console=ttySAC2,115200n8\0"
+
+/* USB */
+#define CONFIG_USB_EHCI_EXYNOS
+
+/* DFU */
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_32M
+#define DFU_DEFAULT_POLL_TIMEOUT	300
+#define DFU_MANIFEST_POLL_TIMEOUT	25000
+
+/* THOR */
+#define CONFIG_G_DNL_THOR_VENDOR_NUM	CONFIG_USB_GADGET_VENDOR_NUM
+#define CONFIG_G_DNL_THOR_PRODUCT_NUM	0x685D
+
+/* UMS */
+#define CONFIG_G_DNL_UMS_VENDOR_NUM	0x0525
+#define CONFIG_G_DNL_UMS_PRODUCT_NUM	0xA4A5
+
+/* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */
+#undef CONFIG_EXYNOS_TMU
+
+#define CONFIG_DFU_ALT_SYSTEM               \
+	"uImage fat 0 1;"                   \
+	"zImage fat 0 1;"                   \
+	"Image.itb fat 0 1;"                \
+	"uInitrd fat 0 1;"                  \
+	"boot.scr fat 0 1;"                 \
+	"boot.cmd fat 0 1;"                 \
+	"exynos5422-odroidxu3.dtb fat 0 1;" \
+	"exynos5422-odroidxu3-lite.dtb fat 0 1;" \
+	"exynos5422-odroidxu4.dtb fat 0 1;" \
+	"exynos5422-odroidhc1.dtb fat 0 1;" \
+	"boot part 0 1;"                    \
+	"root part 0 2\0"
+
+#define CONFIG_DFU_ALT_BOOT_EMMC           \
+	"u-boot raw 0x3e 0x800 mmcpart 1;" \
+	"bl1 raw 0x0 0x1e mmcpart 1;"      \
+	"bl2 raw 0x1e 0x1d mmcpart 1;"     \
+	"tzsw raw 0x83e 0x200 mmcpart 1;"  \
+	"params.bin raw 0x1880 0x20\0"
+
+#define CONFIG_DFU_ALT_BOOT_SD   \
+	"u-boot raw 0x3f 0x800;" \
+	"bl1 raw 0x1 0x1e;"      \
+	"bl2 raw 0x1f 0x1d;"     \
+	"tzsw raw 0x83f 0x200;"  \
+	"params.bin raw 0x1880 0x20\0"
+
+/* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */
+#define CONFIG_MISC_COMMON
+#define CONFIG_SET_DFU_ALT_INFO
+#define CONFIG_SET_DFU_ALT_BUF_LEN	(SZ_1K)
+
+/* Set soc_rev, soc_id, board_rev, board_name, fdtfile */
+#define CONFIG_ODROID_REV_AIN		9
+#define CONFIG_REVISION_TAG
+
+/*
+ * Need to override existing one (smdk5420) with odroid so set_board_info will
+ * use proper prefix when creating full board_name (SYS_BOARD + type)
+ */
+#undef CONFIG_SYS_BOARD
+#define CONFIG_SYS_BOARD		"odroid"
+
+/* Define new extra env settings, including DFU settings */
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	EXYNOS_DEVICE_SETTINGS \
+	EXYNOS_FDTFILE_SETTING \
+	MEM_LAYOUT_ENV_SETTINGS \
+	BOOTENV \
+	"rootfstype=ext4\0" \
+	"console=" CONFIG_DEFAULT_CONSOLE \
+	"fdtfile=exynos5422-odroidxu3.dtb\0" \
+	"board_name=odroidxu3\0" \
+	"mmcbootdev=0\0" \
+	"mmcrootdev=0\0" \
+	"mmcbootpart=1\0" \
+	"mmcrootpart=2\0" \
+	"dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \
+	"dfu_alt_info=Autoset by THOR/DFU command run.\0"
+
+#endif	/* __CONFIG_H */