diff options
Diffstat (limited to 'include/configs/omap3_evm.h')
| -rw-r--r-- | include/configs/omap3_evm.h | 157 |
1 files changed, 157 insertions, 0 deletions
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h new file mode 100644 index 0000000..8e98977 --- /dev/null +++ b/include/configs/omap3_evm.h @@ -0,0 +1,157 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Configuration settings for the TI OMAP3 EVM board. + * + * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author : + * Manikandan Pillai <mani.pillai@ti.com> + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * Manikandan Pillai <mani.pillai@ti.com> + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/ti_omap3_common.h> + +/* + * We are only ever GP parts and will utilize all of the "downloaded image" + * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB). + */ + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* NAND */ +#if defined(CONFIG_NAND) +#define CONFIG_SYS_FLASH_BASE NAND_BASE +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ + 10, 11, 12, 13} +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW +#define CONFIG_SYS_ENV_SECT_SIZE SZ_128K +#define CONFIG_ENV_ADDR 0x260000 +#define CONFIG_ENV_OVERWRITE +/* NAND: SPL falcon mode configs */ +#if defined(CONFIG_SPL_OS_BOOT) +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000 +#endif /* CONFIG_SPL_OS_BOOT */ +#endif /* CONFIG_NAND */ + +#define MEM_LAYOUT_ENV_SETTINGS \ + DEFAULT_LINUX_BOOT_ENV + +#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \ + "bootcmd_" #devtypel #instance "=" \ + "setenv mmcdev " #instance "; " \ + "run mmcboot\0" +#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \ + #devtypel #instance " " + +#if defined(CONFIG_NAND) + +#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \ + "bootcmd_" #devtypel #instance "=" \ + "if test ${mtdids} = '' || test ${mtdparts} = '' ; then " \ + "echo NAND boot disabled: No mtdids and/or mtdparts; " \ + "else " \ + "run nandboot; " \ + "fi\0" +#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ + #devtypel #instance " " + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(LEGACY_MMC, legacy_mmc, 0) \ + func(UBIFS, ubifs, 0) \ + func(NAND, nand, 0) + +#else /* !CONFIG_NAND */ + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(LEGACY_MMC, legacy_mmc, 0) + +#endif /* CONFIG_NAND */ + +#include <config_distro_bootcmd.h> + +#define CONFIG_EXTRA_ENV_SETTINGS \ + MEM_LAYOUT_ENV_SETTINGS \ + "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + "fdt_high=0xffffffff\0" \ + "console=ttyO0,115200n8\0" \ + "bootdir=/boot\0" \ + "bootenv=uEnv.txt\0" \ + "bootfile=zImage\0" \ + "bootpart=0:2\0" \ + "bootubivol=rootfs\0" \ + "bootubipart=rootfs\0" \ + "optargs=\0" \ + "mmcdev=0\0" \ + "mmcpart=2\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext4 rootwait\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "${mtdparts} " \ + "${optargs} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ + "ext4bootenv=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootenv}\0" \ + "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ + "env import -t ${loadaddr} ${filesize}\0" \ + "mmcbootenv=setenv bootpart ${mmcdev}:${mmcpart}; " \ + "mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "run loadbootenv && run importbootenv; " \ + "run ext4bootenv && run importbootenv; " \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...; " \ + "run uenvcmd; " \ + "fi; " \ + "fi\0" \ + "loadimage=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ + "loaddtb=ext4load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ + "mmcboot=run mmcbootenv; " \ + "if run loadimage && run loaddtb; then " \ + "echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} ...; " \ + "run mmcargs; " \ + "if test ${bootfile} = uImage; then " \ + "bootm ${loadaddr} - ${fdtaddr}; " \ + "fi; " \ + "if test ${bootfile} = zImage; then " \ + "bootz ${loadaddr} - ${fdtaddr}; " \ + "fi; " \ + "fi\0" \ + "nandroot=ubi0:rootfs ubi.mtd=rootfs rw noinitrd\0" \ + "nandrootfstype=ubifs rootwait\0" \ + "nandargs=setenv bootargs console=${console} " \ + "${mtdparts} " \ + "${optargs} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandboot=if nand read ${loadaddr} kernel && nand read ${fdtaddr} dtb; then " \ + "echo Booting uImage from NAND MTD 'kernel' partition ...; " \ + "run nandargs; " \ + "bootm ${loadaddr} - ${fdtaddr}; " \ + "fi\0" \ + BOOTENV + +#endif /* __CONFIG_H */ |