diff options
Diffstat (limited to 'include/configs/ti816x_evm.h')
| -rw-r--r-- | include/configs/ti816x_evm.h | 115 |
1 files changed, 115 insertions, 0 deletions
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h new file mode 100644 index 0000000..fc5608b --- /dev/null +++ b/include/configs/ti816x_evm.h @@ -0,0 +1,115 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * ti816x_evm.h + * + * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> + * Antoine Tenart, <atenart@adeneo-embedded.com> + */ + +#ifndef __CONFIG_TI816X_EVM_H +#define __CONFIG_TI816X_EVM_H + +#include <configs/ti_armv7_omap.h> +#include <asm/arch/omap.h> + +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_MACH_TYPE MACH_TYPE_TI8168EVM + +#define CONFIG_EXTRA_ENV_SETTINGS \ + DEFAULT_LINUX_BOOT_ENV \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + +#define CONFIG_BOOTCOMMAND \ + "mmc rescan;" \ + "fatload mmc 0 ${loadaddr} uImage;" \ + "bootm ${loadaddr}" \ + +/* Clock Defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#define CONFIG_CMD_ASKENV + +#define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */ +#define CONFIG_SYS_SDRAM_BASE 0x80000000 + +/** + * Platform/Board specific defs + */ +#define CONFIG_SYS_CLK_FREQ 27000000 +#define CONFIG_SYS_TIMERBASE 0x4802E000 +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ + +/* + * NS16550 Configuration + */ +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (48000000) +#define CONFIG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */ + +/* allow overwriting serial config and ethaddr */ +#define CONFIG_ENV_OVERWRITE + + +/* + * GPMC NAND block. We support 1 device and the physical address to + * access CS0 at is 0x8000000. + */ +#define CONFIG_SYS_NAND_BASE 0x8000000 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* NAND: SPL related configs */ + +/* NAND: device related configs */ +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +/* NAND: driver related configs */ +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, \ + 18, 19, 20, 21, 22, 23, 24, 25, \ + 26, 27, 28, 29, 30, 31, 32, 33, \ + 34, 35, 36, 37, 38, 39, 40, 41, \ + 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, } + +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 14 +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 +#define CONFIG_ENV_OFFSET 0x001c0000 +#define CONFIG_ENV_OFFSET_REDUND 0x001e0000 +#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE + +/* SPL */ +/* Defines for SPL */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE) + +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 + +/* Since SPL did pll and ddr initialization for us, + * we don't need to do it twice. + */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +/* + * Disable MMC DM for SPL build and can be re-enabled after adding + * DM support in SPL + */ +#ifdef CONFIG_SPL_BUILD +#undef CONFIG_DM_MMC +#undef CONFIG_TIMER +#endif +#endif |