1 files changed, 109 insertions, 0 deletions
diff --git a/include/configs/vinco.h b/include/configs/vinco.h
new file mode 100644
index 0000000..eebb3f7
--- /dev/null
+++ b/include/configs/vinco.h
@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration settings for the VInCo platform.
+ *
+ * Based on the settings for the SAMA5-EK board
+ * Copyright (C) 2014 Atmel
+ *		      Bo Shen <voice.shen@atmel.com>
+ * Copyright (C) 2015 Free Electrons
+ *		      Gregory CLEMENT gregory.clement@free-electrons.com
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "at91-sama5_common.h"
+
+/* The value in the common file is too far away for the VInCo platform */
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE		0xfc00c000
+#define CONFIG_USART_ID			30
+
+/* Timer */
+#define CONFIG_SYS_TIMER_COUNTER	0xfc06863c
+
+/* SDRAM */
+#define CONFIG_SYS_SDRAM_BASE           0x20000000
+#define CONFIG_SYS_SDRAM_SIZE		0x4000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
+
+/* SerialFlash */
+
+#ifdef CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI0
+#define CONFIG_SPI_FLASH_STMICRO
+#endif
+
+/* MMC */
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#define ATMEL_BASE_MMCI			0xfc000000
+#define CONFIG_SYS_MMC_CLK_OD		500000
+
+/* For generating MMC partitions */
+
+#endif
+
+/* USB device */
+
+/* Ethernet Hardware */
+#define CONFIG_PHY_SMSC
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_MACB_SEARCH_PHY
+
+#ifdef CONFIG_SPI_BOOT
+/* bootstrap + u-boot + env + linux in serial flash */
+/* Use our own mapping for the VInCo platform */
+#undef CONFIG_ENV_OFFSET
+#undef CONFIG_ENV_SIZE
+
+#define CONFIG_ENV_OFFSET       0x10000
+#define CONFIG_ENV_SIZE         0x10000
+
+/* Update the bootcommand according to our mapping for the VInCo platform */
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND  "mmc dev 0 0;" \
+			    "mmc read ${loadaddr} ${k_offset} ${k_blksize};" \
+			    "mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \
+			    "bootz ${loadaddr} -  ${oftaddr}"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"kernel_start=0x20000\0" \
+	"kernel_size=0x800000\0" \
+	"mmcblksize=0x200\0" \
+	"oftaddr=0x21000000\0" \
+	"loadaddr=0x22000000\0" \
+	"update_uboot=tftp ${loadaddr} u-boot.bin;sf probe 0;" \
+	"sf erase 0x20000 0x4B000; sf write ${loadaddr} 0x20000 0x4B000\0" \
+	"create_partition=setexpr dtb_start ${kernel_start} + 0x400000;" \
+	"setexpr rootfs_start ${kernel_start} + ${kernel_size};" \
+	"setenv partitions 'name=kernel,size=${kernel_size}," \
+	"start=${kernel_start};name=rootfs,size=-';" \
+	"gpt write mmc 0 ${partitions} \0"\
+	"f2blk_size=setexpr fileblksize ${filesize} / ${mmcblksize};" \
+	"setexpr fileblksize ${fileblksize} + 1\0" \
+	"store_kernel=tftp ${loadaddr} zImage; run f2blk_size;" \
+	"setexpr k_blksize ${fileblksize};" \
+	"setexpr k_offset ${kernel_start} / ${mmcblksize};" \
+	"mmc write ${fileaddr} ${k_offset} ${fileblksize}\0" \
+	"store_dtb=tftp ${loadaddr} at91-vinco.dtb; run f2blk_size;" \
+	"setexpr dtb_blksize ${fileblksize};" \
+	"setexpr dtb_offset ${dtb_start} / ${mmcblksize};" \
+	"mmc write ${fileaddr} ${dtb_offset} ${fileblksize}\0" \
+	"store_rootfs=tftp ${loadaddr} vinco-gateway-image-vinco.ext4;" \
+	"setexpr rootfs_offset ${rootfs_start} / ${mmcblksize};" \
+	"mmc write ${fileaddr} ${rootfs_offset} ${fileblksize}\0" \
+	"bootdelay=0\0"
+
+#endif
+
+#endif