1 files changed, 138 insertions, 0 deletions
diff --git a/include/configs/wb45n.h b/include/configs/wb45n.h
new file mode 100644
index 0000000..43de2e1
--- /dev/null
+++ b/include/configs/wb45n.h
@@ -0,0 +1,138 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuation settings for the WB45N CPU Module.
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+#include <asm/hardware.h>
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK  32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK  12000000	/* 12 MHz crystal */
+
+#define CONFIG_CMDLINE_TAG	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/* general purpose I/O */
+#define CONFIG_ATMEL_LEGACY	/* required until (g)pio is fixed */
+#define CONFIG_AT91_GPIO
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE   ATMEL_BASE_DBGU
+#define CONFIG_USART_ID     ATMEL_ID_SYS
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+/* SDRAM */
+#define CONFIG_SYS_SDRAM_BASE       0x20000000
+#define CONFIG_SYS_SDRAM_SIZE       0x04000000	/* 64 MB */
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+    (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+
+/* NAND flash */
+#define CONFIG_SYS_MAX_NAND_DEVICE  1
+#define CONFIG_SYS_NAND_BASE        0x40000000
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE    (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE    (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN  AT91_PIN_PD4
+#define CONFIG_SYS_NAND_READY_PIN   AT91_PIN_PD5
+
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+
+/* Ethernet */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_RETRY_COUNT      20
+#define CONFIG_MACB_SEARCH_PHY
+#define CONFIG_ETHADDR              C0:EE:40:00:00:00
+#define CONFIG_ENV_OVERWRITE        1
+
+/* System */
+#define CONFIG_SYS_LOAD_ADDR        0x22000000	/* load address */
+#define CONFIG_SYS_MEMTEST_START    CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END      0x23e00000
+
+#ifdef CONFIG_SYS_USE_NANDFLASH
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_OFFSET           0xa0000
+#define CONFIG_ENV_OFFSET_REDUND    0xc0000
+#define CONFIG_ENV_SIZE             0x20000	/* 1 block = 128 kB */
+
+#define CONFIG_BOOTCOMMAND  "nand read 0x22000000 0xe0000 0x280000; " \
+    "run _mtd; bootm"
+
+#define MTDIDS_DEFAULT      "nand0=atmel_nand"
+#define MTDPARTS_DEFAULT    "mtdparts=atmel_nand:" \
+                            "128K(at91bs)," \
+                            "512K(u-boot)," \
+                            "128K(u-boot-env)," \
+                            "128K(redund-env)," \
+                            "2560K(kernel-a)," \
+                            "2560K(kernel-b)," \
+                            "38912K(rootfs-a)," \
+                            "38912K(rootfs-b)," \
+                            "46208K(user)," \
+                            "512K(logs)"
+
+#else
+#error No boot method selected, please select 'CONFIG_SYS_USE_NANDFLASH'
+#endif
+
+#define CONFIG_BOOTARGS     "console=ttyS0,115200 earlyprintk " \
+                            "rw noinitrd mem=64M "              \
+                            "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=6"
+
+#define CONFIG_EXTRA_ENV_SETTINGS       \
+    "_mtd=mtdparts default; setenv bootargs ${bootargs} ${mtdparts}\0" \
+    "autoload=no\0" \
+    "autostart=no\0" \
+    "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
+    "\0"
+
+#define CONFIG_SYS_CBSIZE   256
+#define CONFIG_SYS_MAXARGS  16
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN       (512 * 1024 + 0x1000)
+
+/* SPL */
+#define CONFIG_SPL_MAX_SIZE         0x6000
+#define CONFIG_SPL_STACK            0x308000
+
+#define CONFIG_SPL_BSS_START_ADDR   0x20000000
+#define CONFIG_SPL_BSS_MAX_SIZE     0x80000
+#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE  0x80000
+
+#define CONFIG_SYS_MONITOR_LEN      (512 << 10)
+
+#define CONFIG_SYS_MASTER_CLOCK     132096000
+#define CONFIG_SYS_AT91_PLLA        0x20c73f03
+#define CONFIG_SYS_MCKR             0x1301
+#define CONFIG_SYS_MCKR_CSS         0x1302
+
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE   0x800
+#define CONFIG_SYS_NAND_PAGE_COUNT  64
+#define CONFIG_SYS_NAND_OOBSIZE     64
+#define CONFIG_SYS_NAND_BLOCK_SIZE  0x20000
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS   0x0
+
+#endif				/* __CONFIG_H__ */