diff options
Diffstat (limited to 'include/dwmmc.h')
| -rw-r--r-- | include/dwmmc.h | 309 |
1 files changed, 309 insertions, 0 deletions
diff --git a/include/dwmmc.h b/include/dwmmc.h new file mode 100644 index 0000000..f06720d --- /dev/null +++ b/include/dwmmc.h @@ -0,0 +1,309 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2012 SAMSUNG Electronics + * Jaehoon Chung <jh80.chung@samsung.com> + */ + +#ifndef __DWMMC_HW_H +#define __DWMMC_HW_H + +#include <asm/io.h> +#include <mmc.h> + +#define DWMCI_CTRL 0x000 +#define DWMCI_PWREN 0x004 +#define DWMCI_CLKDIV 0x008 +#define DWMCI_CLKSRC 0x00C +#define DWMCI_CLKENA 0x010 +#define DWMCI_TMOUT 0x014 +#define DWMCI_CTYPE 0x018 +#define DWMCI_BLKSIZ 0x01C +#define DWMCI_BYTCNT 0x020 +#define DWMCI_INTMASK 0x024 +#define DWMCI_CMDARG 0x028 +#define DWMCI_CMD 0x02C +#define DWMCI_RESP0 0x030 +#define DWMCI_RESP1 0x034 +#define DWMCI_RESP2 0x038 +#define DWMCI_RESP3 0x03C +#define DWMCI_MINTSTS 0x040 +#define DWMCI_RINTSTS 0x044 +#define DWMCI_STATUS 0x048 +#define DWMCI_FIFOTH 0x04C +#define DWMCI_CDETECT 0x050 +#define DWMCI_WRTPRT 0x054 +#define DWMCI_GPIO 0x058 +#define DWMCI_TCMCNT 0x05C +#define DWMCI_TBBCNT 0x060 +#define DWMCI_DEBNCE 0x064 +#define DWMCI_USRID 0x068 +#define DWMCI_VERID 0x06C +#define DWMCI_HCON 0x070 +#define DWMCI_UHS_REG 0x074 +#define DWMCI_BMOD 0x080 +#define DWMCI_PLDMND 0x084 +#define DWMCI_DBADDR 0x088 +#define DWMCI_IDSTS 0x08C +#define DWMCI_IDINTEN 0x090 +#define DWMCI_DSCADDR 0x094 +#define DWMCI_BUFADDR 0x098 +#define DWMCI_DATA 0x200 + +/* Interrupt Mask register */ +#define DWMCI_INTMSK_ALL 0xffffffff +#define DWMCI_INTMSK_RE (1 << 1) +#define DWMCI_INTMSK_CDONE (1 << 2) +#define DWMCI_INTMSK_DTO (1 << 3) +#define DWMCI_INTMSK_TXDR (1 << 4) +#define DWMCI_INTMSK_RXDR (1 << 5) +#define DWMCI_INTMSK_RCRC (1 << 6) +#define DWMCI_INTMSK_DCRC (1 << 7) +#define DWMCI_INTMSK_RTO (1 << 8) +#define DWMCI_INTMSK_DRTO (1 << 9) +#define DWMCI_INTMSK_HTO (1 << 10) +#define DWMCI_INTMSK_FRUN (1 << 11) +#define DWMCI_INTMSK_HLE (1 << 12) +#define DWMCI_INTMSK_SBE (1 << 13) +#define DWMCI_INTMSK_ACD (1 << 14) +#define DWMCI_INTMSK_EBE (1 << 15) + +/* Raw interrupt Regsiter */ +#define DWMCI_DATA_ERR (DWMCI_INTMSK_EBE | DWMCI_INTMSK_SBE | DWMCI_INTMSK_HLE |\ + DWMCI_INTMSK_FRUN | DWMCI_INTMSK_EBE | DWMCI_INTMSK_DCRC) +#define DWMCI_DATA_TOUT (DWMCI_INTMSK_HTO | DWMCI_INTMSK_DRTO) +/* CTRL register */ +#define DWMCI_CTRL_RESET (1 << 0) +#define DWMCI_CTRL_FIFO_RESET (1 << 1) +#define DWMCI_CTRL_DMA_RESET (1 << 2) +#define DWMCI_DMA_EN (1 << 5) +#define DWMCI_CTRL_SEND_AS_CCSD (1 << 10) +#define DWMCI_IDMAC_EN (1 << 25) +#define DWMCI_RESET_ALL (DWMCI_CTRL_RESET | DWMCI_CTRL_FIFO_RESET |\ + DWMCI_CTRL_DMA_RESET) + +/* CMD register */ +#define DWMCI_CMD_RESP_EXP (1 << 6) +#define DWMCI_CMD_RESP_LENGTH (1 << 7) +#define DWMCI_CMD_CHECK_CRC (1 << 8) +#define DWMCI_CMD_DATA_EXP (1 << 9) +#define DWMCI_CMD_RW (1 << 10) +#define DWMCI_CMD_SEND_STOP (1 << 12) +#define DWMCI_CMD_ABORT_STOP (1 << 14) +#define DWMCI_CMD_PRV_DAT_WAIT (1 << 13) +#define DWMCI_CMD_UPD_CLK (1 << 21) +#define DWMCI_CMD_USE_HOLD_REG (1 << 29) +#define DWMCI_CMD_START (1 << 31) + +/* CLKENA register */ +#define DWMCI_CLKEN_ENABLE (1 << 0) +#define DWMCI_CLKEN_LOW_PWR (1 << 16) + +/* Card-type registe */ +#define DWMCI_CTYPE_1BIT 0 +#define DWMCI_CTYPE_4BIT (1 << 0) +#define DWMCI_CTYPE_8BIT (1 << 16) + +/* Status Register */ +#define DWMCI_FIFO_EMPTY (1 << 2) +#define DWMCI_FIFO_FULL (1 << 3) +#define DWMCI_BUSY (1 << 9) +#define DWMCI_FIFO_MASK 0x1fff +#define DWMCI_FIFO_SHIFT 17 + +/* FIFOTH Register */ +#define MSIZE(x) ((x) << 28) +#define RX_WMARK(x) ((x) << 16) +#define TX_WMARK(x) (x) +#define RX_WMARK_SHIFT 16 +#define RX_WMARK_MASK (0xfff << RX_WMARK_SHIFT) + +#define DWMCI_IDMAC_OWN (1 << 31) +#define DWMCI_IDMAC_CH (1 << 4) +#define DWMCI_IDMAC_FS (1 << 3) +#define DWMCI_IDMAC_LD (1 << 2) + +/* Bus Mode Register */ +#define DWMCI_BMOD_IDMAC_RESET (1 << 0) +#define DWMCI_BMOD_IDMAC_FB (1 << 1) +#define DWMCI_BMOD_IDMAC_EN (1 << 7) + +/* UHS register */ +#define DWMCI_DDR_MODE (1 << 16) + +/* Internal IDMAC interrupt defines */ +#define DWMCI_IDINTEN_RI BIT(1) +#define DWMCI_IDINTEN_TI BIT(0) + +#define DWMCI_IDINTEN_MASK (DWMCI_IDINTEN_TI | \ + DWMCI_IDINTEN_RI) + +/* quirks */ +#define DWMCI_QUIRK_DISABLE_SMU (1 << 0) + +/** + * struct dwmci_host - Information about a designware MMC host + * + * @name: Device name + * @ioaddr: Base I/O address of controller + * @quirks: Quick flags - see DWMCI_QUIRK_... + * @caps: Capabilities - see MMC_MODE_... + * @bus_hz: Bus speed in Hz, if @get_mmc_clk() is NULL + * @div: Arbitrary clock divider value for use by controller + * @dev_index: Arbitrary device index for use by controller + * @dev_id: Arbitrary device ID for use by controller + * @buswidth: Bus width in bits (8 or 4) + * @fifoth_val: Value for FIFOTH register (or 0 to leave unset) + * @mmc: Pointer to generic MMC structure for this device + * @priv: Private pointer for use by controller + */ +struct dwmci_host { + const char *name; + void *ioaddr; + unsigned int quirks; + unsigned int caps; + unsigned int version; + unsigned int clock; + unsigned int bus_hz; + unsigned int div; + int dev_index; + int dev_id; + int buswidth; + u32 fifoth_val; + struct mmc *mmc; + void *priv; + + void (*clksel)(struct dwmci_host *host); + void (*board_init)(struct dwmci_host *host); + + /** + * Get / set a particular MMC clock frequency + * + * This is used to request the current clock frequency of the clock + * that drives the DWMMC peripheral. The caller will then use this + * information to work out the divider it needs to achieve the + * required MMC bus clock frequency. If you want to handle the + * clock external to DWMMC, use @freq to select the frequency and + * return that value too. Then DWMMC will put itself in bypass mode. + * + * @host: DWMMC host + * @freq: Frequency the host is trying to achieve + */ + unsigned int (*get_mmc_clk)(struct dwmci_host *host, uint freq); +#ifndef CONFIG_BLK + struct mmc_config cfg; +#endif + + /* use fifo mode to read and write data */ + bool fifo_mode; +}; + +struct dwmci_idmac { + u32 flags; + u32 cnt; + u32 addr; + u32 next_addr; +} __aligned(ARCH_DMA_MINALIGN); + +static inline void dwmci_writel(struct dwmci_host *host, int reg, u32 val) +{ + writel(val, host->ioaddr + reg); +} + +static inline void dwmci_writew(struct dwmci_host *host, int reg, u16 val) +{ + writew(val, host->ioaddr + reg); +} + +static inline void dwmci_writeb(struct dwmci_host *host, int reg, u8 val) +{ + writeb(val, host->ioaddr + reg); +} +static inline u32 dwmci_readl(struct dwmci_host *host, int reg) +{ + return readl(host->ioaddr + reg); +} + +static inline u16 dwmci_readw(struct dwmci_host *host, int reg) +{ + return readw(host->ioaddr + reg); +} + +static inline u8 dwmci_readb(struct dwmci_host *host, int reg) +{ + return readb(host->ioaddr + reg); +} + +#ifdef CONFIG_BLK +/** + * dwmci_setup_cfg() - Set up the configuration for DWMMC + * + * This is used to set up a DWMMC device when you are using CONFIG_BLK. + * + * This should be called from your MMC driver's probe() method once you have + * the information required. + * + * Generally your driver will have a platform data structure which holds both + * the configuration (struct mmc_config) and the MMC device info (struct mmc). + * For example: + * + * struct rockchip_mmc_plat { + * struct mmc_config cfg; + * struct mmc mmc; + * }; + * + * ... + * + * Inside U_BOOT_DRIVER(): + * .platdata_auto_alloc_size = sizeof(struct rockchip_mmc_plat), + * + * To access platform data: + * struct rockchip_mmc_plat *plat = dev_get_platdata(dev); + * + * See rockchip_dw_mmc.c for an example. + * + * @cfg: Configuration structure to fill in (generally &plat->mmc) + * @host: DWMMC host + * @max_clk: Maximum supported clock speed in HZ (e.g. 150000000) + * @min_clk: Minimum supported clock speed in HZ (e.g. 400000) + */ +void dwmci_setup_cfg(struct mmc_config *cfg, struct dwmci_host *host, + u32 max_clk, u32 min_clk); + +/** + * dwmci_bind() - Set up a new MMC block device + * + * This is used to set up a DWMMC block device when you are using CONFIG_BLK. + * It should be called from your driver's bind() method. + * + * See rockchip_dw_mmc.c for an example. + * + * @dev: Device to set up + * @mmc: Pointer to mmc structure (normally &plat->mmc) + * @cfg: Empty configuration structure (generally &plat->cfg). This is + * normally all zeroes at this point. The only purpose of passing + * this in is to set mmc->cfg to it. + * @return 0 if OK, -ve if the block device could not be created + */ +int dwmci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg); + +#else +/** + * add_dwmci() - Add a new DWMMC interface + * + * This is used when you are not using CONFIG_BLK. Convert your driver over! + * + * @host: DWMMC host structure + * @max_clk: Maximum supported clock speed in HZ (e.g. 150000000) + * @min_clk: Minimum supported clock speed in HZ (e.g. 400000) + * @return 0 if OK, -ve on error + */ +int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk); +#endif /* !CONFIG_BLK */ + +#ifdef CONFIG_DM_MMC +/* Export the operations to drivers */ +int dwmci_probe(struct udevice *dev); +extern const struct dm_mmc_ops dm_dwmci_ops; +#endif + +#endif /* __DWMMC_HW_H */ |