| Age | Commit message (Collapse) | Author |
|---|
|
Expose a separate ACPI description of the SynQuacer eMMC controller
when both ACPI and eMMC support have been enabled in the HII menu.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
|
|
Create a HII menu option to choose between device tree and ACPI platform
descriptions. Note that the option is only active if PCIe compatibility
mode is enabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Wire up the various drivers for the 96Boards LS connector and the
optional Secure96 mezzanine board.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Implement support for the SynQuacer eMMC controller. This involves an
implementation of the SD/MMC override protocol to handle a couple of
quirks that would otherwise prevent this IP from being driven by the
generic SDHCI driver.
Also, add a HII page to the PlatformDxe driver that allows eMMC support
to be enabled, and wire it up for both DeveloperBox and EVB.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Even though the ARM ARM quite clearly states that the CNTFRQ field of
each MMIO timer frame should be a read-only alias of the CNTFRQ field
of the base frame, the SynQuacer SoC implements it as a register that
is programmable separately.
So let's program it from the hardware rather than overriding the
frequency using a DT property.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add menu options to the SynQuacer Platform menu screen to limit the
maximum PCIe link speed for each slot individually. This may be useful
to work around potential PCIe issues.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
To ensure that the I2C master protocol is installed immediately onto
the handles created by PlatformDxe in its entry point, force the
SynQuacerI2cDxe driver to be loaded before PlatformDxe. These handles
are recursively connected by the DXE core as soon as they appear, and
so ensuring that the I2C master protocol driver is available at this
time will ensure that these handles will be connected to it right away.
This is useful when implementations of architectural protocols such as
RTC or the EFI variable store, which should become available long before
the ordinary dispatch of UEFI driver model drivers is started at the end
of DXE, are based on I2C.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Do a global replace of gPcf8563RealTimeClockLibI2cMasterProtolGuid with
gPcf8563RealTimeClockLibI2cMasterProtocolGuid.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The ASM1061 SATA controller integrated into the DeveloperBox board
emits too much electromagnetic radiation, so it needs spread spectrum
mode enabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
For some reason, the Asmedia 118x PCIe switch needs a little help to
make sure that the downstream links train at Gen2 speed. So add a
PCI I/O protocol notifier that implements this for each PCIe downstream
port that is present on the system.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Commit ce95ec196da0 ("Silicon/SynQuacer: enable coherent DMA for NETSEC
and eMMC") introduced a call to MmioOr32 into PlatformDxe without adding
the appropriate #include and LibraryClass references, resulting in build
failures when attempting to build the SynQuacer platforms. So add them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the drivers, library resolutions and PCD settings to enable RTC
support on DeveloperBox. Also, update PlatformDxe to register the
non-discoverable device handles for both I2C controllers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This implements a driver that will take care of platform specific
initialization, such as declaring non-discoverable devices, and
installing the device tree blob as a configuration table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
